LX5000-Winpilot connection problems

Hi again,
Yep,I am trying to get these two %%#^&*@&&#**&(@# things to communicate.

Correct sentenses GPGGA, GPRMC, GPLX1, and LXWP_. are set.
4800 baud, winpilot serial port connected to the NMEA input.output cables,
GPS signal comes in fine in the Winpilot 4.61 Pro

Then I try to download a declared task from winpilot to the LX5000.Works
sometimes,
sometimes not.Even when it says 'download ok' I caanot find the task in the
LX5000 !

VERY scarce information in both the Filser manual and the WINPILOT manual
(it is
competition after all right ?..)

I should say that I tried FlywithCE downloader,that seems to work better !

Any help around ?
Many thanks

Marc TEUGELS DG400 "MT"

Try talking to LX Navigation who manufacture the LX5000 directly. In my
experience they are very knowledgeable and helpful.

Bruce
Try support at lxnavigation.si (.si is Slovenia)

Marc Teugels wrote:
Hi again,
Yep,I am trying to get these two %%#^&*@&&#**&(@# things to communicate.

Correct sentenses GPGGA, GPRMC, GPLX1, and LXWP_. are set.
4800 baud, winpilot serial port connected to the NMEA input.output cables,
GPS signal comes in fine in the Winpilot 4.61 Pro

Then I try to download a declared task from winpilot to the LX5000.Works
sometimes,
sometimes not.Even when it says 'download ok' I caanot find the task in the
LX5000 !

VERY scarce information in both the Filser manual and the WINPILOT manual
(it is
competition after all right ?..)

I should say that I tried FlywithCE downloader,that seems to work better !

Any help around ?
Many thanks

Marc TEUGELS DG400 "MT"