If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
NEXTEL paint
Hi, does anyone in USA know where to buy NEXTEL Suede paint used for instrument panels? p.s.
|
#2
|
|||
|
|||
NEXTEL paint
Mankiewicz Coatings, LLC
1200 Charleston Regional Parkway Charleston, SC 29492, United States +1 843 654 7755 +1 843 654 7759 |
#3
|
|||
|
|||
NEXTEL paint
On Saturday, March 30, 2019 at 11:54:03 PM UTC-4, Tim Taylor wrote:
Mankiewicz Coatings, LLC 1200 Charleston Regional Parkway Charleston, SC 29492, United States +1 843 654 7755 +1 843 654 7759 The problem is you will have to buy a gallon. Primer and paint over $500 not including shipping. You are better off sending the parts for painting, Andrzej |
#4
|
|||
|
|||
NEXTEL paint
On Saturday, March 30, 2019 at 9:18:11 PM UTC-4, wrote:
Hi, does anyone in USA know where to buy NEXTEL Suede paint used for instrument panels? p.s. I painted a instrument panel with Nextel from Mankiewicz Coatings and they sold me a quart ( still very expensive). Ken |
#5
|
|||
|
|||
NEXTEL paint
we flat black anodized Grob Aluminum panels and they came out great, and not too expensive.
SF |
#6
|
|||
|
|||
NEXTEL paint
On Sunday, March 31, 2019 at 5:30:18 PM UTC-7, SF wrote:
we flat black anodized Grob Aluminum panels and they came out great, and not too expensive. SF I finish with Rust Oleum rough finish spray Home Depot. If you want it flat black then coat with Flat Black wood stove paint Rust Oleum Home Depot. http://www.craggyaero.com/Ventusb2013.jpg Richard www.craggyaero.com |
#7
|
|||
|
|||
NEXTEL paint
Thank you for contact info, I need just very little for canopy frame to match my panel (Nextel Suede grey). p.s.
|
#8
|
|||
|
|||
NEXTEL paint
On Sunday, March 31, 2019 at 9:31:40 PM UTC-4, Richard Pfiffner wrote:
On Sunday, March 31, 2019 at 5:30:18 PM UTC-7, SF wrote: we flat black anodized Grob Aluminum panels and they came out great, and not too expensive. SF I finish with Rust Oleum rough finish spray Home Depot. If you want it flat black then coat with Flat Black wood stove paint Rust Oleum Home Depot. http://www.craggyaero.com/Ventusb2013.jpg Richard www.craggyaero.com I do the same. The textured paint also has the benefit of hiding small defects. UH |
#9
|
|||
|
|||
NEXTEL paint
On Monday, April 1, 2019 at 5:42:23 AM UTC-7, wrote:
On Sunday, March 31, 2019 at 9:31:40 PM UTC-4, Richard Pfiffner wrote: On Sunday, March 31, 2019 at 5:30:18 PM UTC-7, SF wrote: we flat black anodized Grob Aluminum panels and they came out great, and not too expensive. SF I finish with Rust Oleum rough finish spray Home Depot. If you want it flat black then coat with Flat Black wood stove paint Rust Oleum Home Depot. http://www.craggyaero.com/Ventusb2013.jpg Richard www.craggyaero.com I do the same. The textured paint also has the benefit of hiding small defects. UH I've done the same on the glare shield, but Rustoleum seems to take for ever to off-gas. You could smell it months after application. Hank, how hot do you cure it after painting? Jim |
#10
|
|||
|
|||
NEXTEL paint
I used Flock-it to replace the faded gray piece of carpet covering my glareshield. Flocking is easy and produces a fantastic finish for glareshields.
http://www.flockit.com/ Available on Amazon, too. PA |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Paint job W&B | Dan Luke | Owning | 2 | March 31st 07 12:03 AM |
paint | ED[_2_] | Home Built | 1 | March 23rd 07 06:15 AM |
paint | [email protected] | Soaring | 9 | March 7th 06 09:22 PM |
Paint | Steve | Owning | 17 | January 8th 06 08:54 AM |
Nextel paint finish for cockpits | Simon Waddell | Soaring | 5 | December 26th 03 02:48 PM |