A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Ventus 2cxa instrument panel gas spring needed



 
 
Thread Tools Display Modes
  #1  
Old January 10th 20, 04:02 PM posted to rec.aviation.soaring
Ken Sorenson
external usenet poster
 
Posts: 23
Default Ventus 2cxa instrument panel gas spring needed

300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson
Ads
  #2  
Old January 10th 20, 04:08 PM posted to rec.aviation.soaring
Ken Sorenson
external usenet poster
 
Posts: 23
Default Ventus 2cxa instrument panel gas spring needed

On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson


Oops Corrected Art. Nr 1107437.
  #3  
Old January 10th 20, 04:20 PM posted to rec.aviation.soaring
Richard Pfiffner[_2_]
external usenet poster
 
Posts: 207
Default Ventus 2cxa instrument panel gas spring needed

On Friday, January 10, 2020 at 7:08:18 AM UTC-8, Ken Sorenson wrote:
On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson


Oops Corrected Art. Nr 1107437.


Ken,

You can probably get one he

https://www.acecontrols.com

You will need to specify both the extended, retracted lengths, rod dia, cylinder dia,end fittings,and newtons.

Richard
www.craggyaero.com
  #4  
Old January 10th 20, 05:24 PM posted to rec.aviation.soaring
Ken Sorenson
external usenet poster
 
Posts: 23
Default Ventus 2cxa instrument panel gas spring needed

On Friday, January 10, 2020 at 9:20:52 AM UTC-6, Richard Pfiffner wrote:
On Friday, January 10, 2020 at 7:08:18 AM UTC-8, Ken Sorenson wrote:
On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson


Oops Corrected Art. Nr 1107437.


Ken,

You can probably get one he

https://www.acecontrols.com

You will need to specify both the extended, retracted lengths, rod dia, cylinder dia,end fittings,and newtons.

Richard
www.craggyaero.com


Richard Thanks! I can get close using their configuration tool and catalog. May have to go this route and then modify it. Excellent tip.
  #5  
Old January 10th 20, 05:38 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 121
Default Ventus 2cxa instrument panel gas spring needed


I've had luck here
https://www.mcmaster.com/struts
  #6  
Old January 10th 20, 07:37 PM posted to rec.aviation.soaring
Dan Marotta
external usenet poster
 
Posts: 3,868
Default Ventus 2cxa instrument panel gas spring needed

Years back I needed the canopy gas spring for my LAK-17a.* With some
digging on the internet I was able to cross reference it with the hood
(bonnet) lift spring used on the mid-90s 7-series BMW.* Picked one up at
the local Autozone.



On 1/10/2020 9:38 AM, wrote:
I've had luck here
https://www.mcmaster.com/struts

--
Dan, 5J
  #7  
Old January 10th 20, 08:22 PM posted to rec.aviation.soaring
Dave Nadler
external usenet poster
 
Posts: 1,431
Default Ventus 2cxa instrument panel gas spring needed

Hi Ken - I've used Bansbach a few times (also original equipment on some gliders):
http://www.bansbach.com/Bansbach/ind...CcDwQA vD_BwE
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Ventus 2cxa with FES LZ design Soaring 55 April 21st 14 09:30 AM
Blank Discus - Ventus Instrument panel for sale james bakeman Soaring 2 September 24th 11 07:30 PM
AS responds to the latest Ventus 2cxa KevinFinke Soaring 3 March 18th 09 04:45 AM
Ventus 1 - anyone have experience w/o aileron centering spring? Gary Emerson Soaring 0 November 1st 08 03:36 PM
PIREP Needed - Aircraft Door Seals Instrument Panel cover Mike Spera Owning 2 June 24th 06 05:02 PM


All times are GMT +1. The time now is 06:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 AviationBanter.
The comments are property of their posters.