Becker 4201 Radio Wiring Diagram - need help

I am confused with the wiring diagram of the manual. Can anyone help
clear up some confusion on the placement of the PTT wires? Where do
wires 17 & 25 go in conjunction with the two wires that come from the
PTT on the control stick?

Pins 13 and 25 are ground. Pin 17 is PTT, grounding it switches to
tramsmit.

So one wire from the PTT switch (doesn't matter which one) goes to pin 25
(or 13, or ground bus bar or anything else connected to radio ground) and
the other wire to pin 17.

However, I ask, if you can't follow the diagram in the manual, should you
be wiring up your own radio instead of getting somebody who knows what they
are doing to do it for you?

8-) , Peter

At 13:53 18 October 2012, Scott Alexander wrote:
I am confused with the wiring diagram of the manual. Can anyone help
clear up some confusion on the placement of the PTT wires? Where do
wires 17 & 25 go in conjunction with the two wires that come from the
PTT on the control stick?

On Thursday, October 18, 2012 6:53:59 AM UTC-7, Scott Alexander wrote:
I am confused with the wiring diagram of the manual. Can anyone help

clear up some confusion on the placement of the PTT wires? Where do

wires 17 & 25 go in conjunction with the two wires that come from the

PTT on the control stick?

Scott,
You might find the answer in the similar thread discussed few days ago
https://groups.google.com/forum/?hl=...ng/oaFM5FCLNMc

Robert