Flarmnet problems on Flarmview

Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

What did you name the converted file? IIRC it must be flarm.flx. The converter will happily allow you to give the file other names, which won't work..

best,
Evan Ludeman

I noticed in Flarmview-1 manual it is as you stated but in the Flarmview-2 manual it just says -

ï‚· Please visit http://www.flarmnet.org
ï‚· Download file for LXNAV (LX8000, LX8080, LX9000) or click on following link: http://www.flarmnet.org/files/lxfile.php
ï‚· FLN type file will be downloaded.
ï‚· Copy flarm.fln file to SD card of FlarmView2.

It does not mention the conversion program or renaming ???


On Monday, May 2, 2016 at 10:45:16 AM UTC-7, Tango Eight wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

What did you name the converted file? IIRC it must be flarm.flx. The converter will happily allow you to give the file other names, which won't work.

best,
Evan Ludeman

I did try with and without the conversion process (.fln and .flx) but still not working.

On Monday, May 2, 2016 at 10:45:16 AM UTC-7, Tango Eight wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

What did you name the converted file? IIRC it must be flarm.flx. The converter will happily allow you to give the file other names, which won't work.

best,
Evan Ludeman

On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

Karl:
Play with changes in the baud rate. I had the same problem and finally getting the correct baud rate on flarmview fixed it. Interestingly, after I did the 2015 software update the same problem came back - and it was fixed the same way.
Roy

Thanks Roy I'll give that a try. I had thought of that but given that the rest of the functions worked figured it wasn't the problem.


On Monday, May 2, 2016 at 6:50:46 PM UTC-7, wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

Karl:
Play with changes in the baud rate. I had the same problem and finally getting the correct baud rate on flarmview fixed it. Interestingly, after I did the 2015 software update the same problem came back - and it was fixed the same way.
Roy

On Tuesday, May 3, 2016 at 8:36:07 AM UTC-7, Karl Kunz wrote:
Thanks Roy I'll give that a try. I had thought of that but given that the rest of the functions worked figured it wasn't the problem.


On Monday, May 2, 2016 at 6:50:46 PM UTC-7, wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

Karl:
Play with changes in the baud rate. I had the same problem and finally getting the correct baud rate on flarmview fixed it. Interestingly, after I did the 2015 software update the same problem came back - and it was fixed the same way.
Roy

Karl, I suspected earlier there was an issue but last weekend I saw all the tail numbers. I assume you left the micro SD card in, otherwise this will be the reason as I am pretty sure the micro SD card needs to always be in to retain configuration and flarmnet data.

Ramy

Yes I left the card in and was seeing all the targets but not seeing the tail numbers. The instructions for ins


On Tuesday, May 3, 2016 at 2:37:10 PM UTC-7, Ramy wrote:
On Tuesday, May 3, 2016 at 8:36:07 AM UTC-7, Karl Kunz wrote:
Thanks Roy I'll give that a try. I had thought of that but given that the rest of the functions worked figured it wasn't the problem.


On Monday, May 2, 2016 at 6:50:46 PM UTC-7, wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the Flarmnet file after running it thru the converter required by LXNav and not getting IDs. My partner also installed the same file on his Flarmview1 with the same result. Is anyone else having this same problem?

Karl:
Play with changes in the baud rate. I had the same problem and finally getting the correct baud rate on flarmview fixed it. Interestingly, after I did the 2015 software update the same problem came back - and it was fixed the same way.
Roy

Karl, I suspected earlier there was an issue but last weekend I saw all the tail numbers. I assume you left the micro SD card in, otherwise this will be the reason as I am pretty sure the micro SD card needs to always be in to retain configuration and flarmnet data.

Ramy

http://www.lxnav.com/contact.html

best,
Evan

Hi Karl,

Give me a call sometime. I'll be glad to support you.

Note: You don't need to use the PC FlarmNet converter application. Recent
versions of the FlarmView firmware have a built-in converter. After you
save the FlarmNet .fln file to the microSD memory card, put the card into
the FlarmView 2 and go to the Files menu and select "convert fln to flx" (or
something like that). The conversion takes a few seconds. Doing the
conversion in the unit will have the added side-benefit of verifying that
the microSD card is working OK.

Best Regards,

Paul Remde
Cumulus Soaring, Inc.
_________________________________________________

"Karl Kunz" wrote in message
...

Yes I left the card in and was seeing all the targets but not seeing the
tail numbers. The instructions for ins


On Tuesday, May 3, 2016 at 2:37:10 PM UTC-7, Ramy wrote:
On Tuesday, May 3, 2016 at 8:36:07 AM UTC-7, Karl Kunz wrote:
Thanks Roy I'll give that a try. I had thought of that but given that
the rest of the functions worked figured it wasn't the problem.


On Monday, May 2, 2016 at 6:50:46 PM UTC-7,
wrote:
On Monday, May 2, 2016 at 11:23:22 AM UTC-4, Karl Kunz wrote:
Just installed a Flarm Core with a Flarmview2 display. Installed the
Flarmnet file after running it thru the converter required by LXNav
and not getting IDs. My partner also installed the same file on his
Flarmview1 with the same result. Is anyone else having this same
problem?

Karl:
Play with changes in the baud rate. I had the same problem and
finally getting the correct baud rate on flarmview fixed it.
Interestingly, after I did the 2015 software update the same problem
came back - and it was fixed the same way.
Roy

Karl, I suspected earlier there was an issue but last weekend I saw all
the tail numbers. I assume you left the micro SD card in, otherwise this
will be the reason as I am pretty sure the micro SD card needs to always
be in to retain configuration and flarmnet data.

Ramy