A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Piloting
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

"Aluminum Overcast" damaged by gear collapse



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #23  
Old May 8th 04, 07:44 PM
muff528
external usenet poster
 
Posts: n/a
Default

After discussing the incident with my father, who served as Flight Engineer
during WWII, he mentioned that part of his job as FE (at least on his crew)
was to manually check and lock the gear after they were deployed even if the
pilot's indicator said they were locked. He said that on more than one
occasion they were not locked. Also I wonder if it's possible that on the
Aluminum Overcast only one gear "really" failed and the other then collapsed
because of unusual stresses. ?

"James Robinson" wrote in message
...
The B-17 bomber owned by the Experimental Aircraft Assn. was damaged
yesterday at Van Nuys airport when its main gear collaped.

From the videos on TV, you could see its tail wheel firmly on the
ground, when the main gear retracted, and the aircraft dropped onto the
runway. The crew must had had that sinking feeling about then. It slid
perhaps 50 feet or so on its belly.

The media seems to like to say it made a belly landing, or a rough
landing, but it was apparent that it had already landed, and was simply
completing the rollout, and was preparing to turn off when it happened.

Anyway, here's a link to their web site, where they have a short
description of the incident:

http://www.b17.org/

And a typical media story:

http://www.dailynews.com/Stories/0,1...129868,00.html

I couldn't find the video clip, but I assume it will appear online
sometime today.

I hope they can get it flying again soon.



 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
EAA's B-17 "Aluminum Overcast" Gear collapse at Van Nuys airport BlakeleyTB Home Built 4 May 8th 04 06:15 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 1 November 24th 03 02:46 PM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 2 November 24th 03 05:23 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 0 November 24th 03 03:52 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart D. Hull Home Built 0 November 22nd 03 06:24 AM


All times are GMT +1. The time now is 11:07 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.