A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Rudder cable - was The Little Wheel in Back



 
 
Thread Tools Display Modes
  #1  
Old September 9th 03, 05:36 PM
BD5ER
external usenet poster
 
Posts: n/a
Default Rudder cable - was The Little Wheel in Back

Asking a question and taking this thread off on a tangent:

Been thinking about using some Spectra for rudder cables. Other than the
obvious poor heat tolerance, which shouldn't be a factor in my case for rudder
cables, what other problems, ecpected or unexpected, might I encounter if I
were to experiment in this manner? Abrasion, stretch, creep, and attachment
methods have already been considered.

Anyone already using Spectra for control cables?

Now I'm really curious. Saw some stainless steel cable at the tractor
supply the other day for about $1 foot. 1/8" and looked to be about 9
cords, each with 7 wires. Is there a difference between the steel cable


found at the tractor supply and what AS&S ships?

Biggest difference is probably the per-foot marking on the price tag.

that is a dangerous complacency.
aircraft wire has more wires in each "chord" to reduce the effects on
cable strength of wear through the pulleys and guides.
7 chords by 19 strands is the usual aircraft stuff.


Actually, aviation cables come in a variety of layouts, depending upon the
usage of the cable. First number is the number of strands, second number
is the number of wires in each strand. You can multiply the numbers to
determine the number of individual wires in a given cable... so 1/8" 7x19
cable has 133 tiny wires, and 1/8" 1x19 has nineteen rather thick wires.

Obviously, tiny wires are going to bend easier than thick wires. So the
7x19 cable is going to be more flexible than the 1x19. But it's going to
be more sensitive to friction; those little wires are going to wear through
faster than the thicker ones. But that stiff 1x19 is going to present more
problems when trying to form it around a thimble.

Fly Babies use both types... 7x19 cables for the rudder, and 1x19 cables
for the bracing wires.

Ron Wanttaja



  #2  
Old September 10th 03, 03:33 AM
BD5ER
external usenet poster
 
Posts: n/a
Default

Yes. The Sparrowhawk ultralight sailplane.
http://www.windward-performance.com/


Thanks for the info. Sometimes it's nice not to have to invent the wheel.
Guess I'll have to look into it.
  #3  
Old September 10th 03, 02:08 PM
Ernest Christley
external usenet poster
 
Posts: n/a
Default

Tim Ward wrote:
"BD5ER" wrote in message
...

Asking a question and taking this thread off on a tangent:

Been thinking about using some Spectra for rudder cables. Other than the
obvious poor heat tolerance, which shouldn't be a factor in my case for


rudder

cables, what other problems, ecpected or unexpected, might I encounter if


I

were to experiment in this manner? Abrasion, stretch, creep, and


attachment

methods have already been considered.

Anyone already using Spectra for control cables?



Yes. The Sparrowhawk ultralight sailplane.
http://www.windward-performance.com/

Tim Ward



What is Spectra, and what advantage does it have over steel cable?

--
----Because I can----
http://www.ernest.isa-geek.org/
------------------------

  #4  
Old September 10th 03, 03:28 PM
Tim Ward
external usenet poster
 
Posts: n/a
Default


"Ernest Christley" wrote in message
. com...
Tim Ward wrote:
"BD5ER" wrote in message
...

Asking a question and taking this thread off on a tangent:

Been thinking about using some Spectra for rudder cables. Other than

the
obvious poor heat tolerance, which shouldn't be a factor in my case for


rudder

cables, what other problems, ecpected or unexpected, might I encounter

if

I

were to experiment in this manner? Abrasion, stretch, creep, and


attachment

methods have already been considered.

Anyone already using Spectra for control cables?



Yes. The Sparrowhawk ultralight sailplane.
http://www.windward-performance.com/

Tim Ward



What is Spectra, and what advantage does it have over steel cable?

--
----Because I can----
http://www.ernest.isa-geek.org/
------------------------


It's ultra high molecular weight polyethylene (UHMWPE).
For a given diameter, it's stronger than steel, and much, much lighter.

Tim Ward


  #5  
Old September 10th 03, 03:48 PM
Barnyard BOb --
external usenet poster
 
Posts: n/a
Default


What is Spectra, and what advantage does it have over steel cable?

--
----Because I can----
http://www.ernest.isa-geek.org/
------------------------


It's ultra high molecular weight polyethylene (UHMWPE).
For a given diameter, it's stronger than steel, and much, much lighter.

Tim Ward

+++++++++++++++++++++++++++++++++++++

My first experience years ago with Spectra...
was with fishing line. Not cheap.

Genuine modern miracle space age stuff.



Barnyard BOb --


  #6  
Old September 10th 03, 07:55 PM
BD5ER
external usenet poster
 
Posts: n/a
Default

Sounds like a solution to a non-existent problem.

Rich "To save an ounce, lose a hamburger" S.



That weight reduction program is well underway. Hamburgers are in, just no
carbs.......and the weight savings is already many times greater than all of
the carbon and Spectra combined will save.

I agree there isn't much of a "problem" to be solved. Still, I like the idea
of something a bit different, otherwise I'd have just bought a 172.
  #7  
Old September 10th 03, 08:33 PM
Dave
external usenet poster
 
Posts: n/a
Default



BD5ER wrote:
Sounds like a solution to a non-existent problem.

Rich "To save an ounce, lose a hamburger" S.




That weight reduction program is well underway. Hamburgers are in, just no
carbs.......and the weight savings is already many times greater than all of
the carbon and Spectra combined will save.

I agree there isn't much of a "problem" to be solved. Still, I like the idea
of something a bit different, otherwise I'd have just bought a 172.

We use it in the skydiving industry for canopy lines. It appears to be
very strong and abrasion resistant. The lines aren't much different in
size than tooth picks. 500 or 800 pound test.
The only problem is, it shrinks when heated. The line sets on our
parachutes need to be replaced every so often because of abrasion heat.
Usually around 500 jumps or so.
Should not be a problem in most aircraft.
Also, UV can hurt the strength of the line.

Dave

  #8  
Old September 10th 03, 11:20 PM
Rich S.
external usenet poster
 
Posts: n/a
Default

"BD5ER" wrote in message
...

That weight reduction program is well underway. Hamburgers are in, just

no
carbs.......and the weight savings is already many times greater than all

of
the carbon and Spectra combined will save.

I agree there isn't much of a "problem" to be solved. Still, I like the

idea
of something a bit different, otherwise I'd have just bought a 172.


You need some of that stuff that was featured in "Fountains of Paradise" by
Arthur C. Clarke.

Rich S.


  #9  
Old September 11th 03, 08:51 AM
Corrie
external usenet poster
 
Posts: n/a
Default

"Rich S." wrote in message ...
"BD5ER" wrote in message
...
I agree there isn't much of a "problem" to be solved. Still, I like the

idea
of something a bit different, otherwise I'd have just bought a 172.


You need some of that stuff that was featured in "Fountains of Paradise" by
Arthur C. Clarke.


The space-elevator cable stuff? Welcome to the 21st century - it's
not quite unobtanium anymore. It's available (or soon will be) at
your local Nano Depot in the Buckytubes aisle. Carbon filaments made
of stacks of rings of carbon atoms. Tensile strength that makes steel
look like wet tissue. Now if you could only get it in lengths greater
than .01 mm ...

Corrie
  #10  
Old September 11th 03, 04:14 PM
Rich S.
external usenet poster
 
Posts: n/a
Default

"Corrie" wrote in message
om...

The space-elevator cable stuff? Welcome to the 21st century - it's
not quite unobtanium anymore. It's available (or soon will be) at
your local Nano Depot in the Buckytubes aisle. Carbon filaments made
of stacks of rings of carbon atoms. Tensile strength that makes steel
look like wet tissue. Now if you could only get it in lengths greater
than .01 mm ...


Yeah - that's it. I'd like it at least 3-4" long for a cheese slicer.

Rich S.


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
AOPA Stall/Spin Study -- Stowell's Review (8,000 words) Rich Stowell Aerobatics 28 January 2nd 09 03:26 PM
The Little Wheel in Back Veeduber Home Built 6 September 8th 03 10:29 AM


All times are GMT +1. The time now is 11:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.