If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#28
|
|||
|
|||
LX5000/Flarm Red box
At 03:00 10 October 2020, 2G wrote:
On Friday, October 9, 2020 at 10:40:20 AM UTC-7, B BRIONES wrote: On Friday, October 9, 2020 at 7:55:04 AM UTC-7, kinsell wrote: Why are so many topics getting threaded under "Another E glider concept"? Happens both on my newsreader, as well as when just viewing R.A.S. on Google. On 10/9/20 8:44 AM, Adrian Morgan wrote: I have an LX 5000, which I want to interface with a Red Box Flarm. The LX has four ports (five including the vario display connection) labelled: 1. Power (wired to battery main switch) 2. Hold (wired to flip switch. No idea what it does!) 3. DataComm (a previous owner had "hot wired" two of its leads into a Garmin LX12 cable. No Garmin now fitted) 4. Meter ( RJ 12 6 pin phone type port. Not connected.) The LX presumably has a built in GPS, but needs an aerial. The LX is not finding a GPS fix, as there is no aerial. I assume the Garmin had been used to give the LX data via the DataComm hot wires. Now, with no Garmin, I assume the Flarm GPS aerial could do the job. Question, how to wire it all up. Must be simple for anyone other than an electronic imbecile like myself. here's another Not an e-glider but a fossil burning, screaming jet engine, glider looking but short winged-- https://www.desertaerospace.com/extreme-light-jet--xlj- That doesn't even rise to the level of a concept - more like wishful thinking. Tom Which does nothing to answer the original poster's question. Shame on you! Quite simply, LX5000 and Flarm cannot exchange Spatial Data. Both the LX5000 and Flarm are IGC Flight Recorders and as such can only receiver Spatial Data via the antenna. The dataports can transfer Task Declarations (prior to Take-Off). They may also output NMEA data, but not receive it. The LX5000 can control a suitable Radio via a Radio Bridge. Waypoint and similar files can be received via the dataport. IGC files can be downloaded. Dataports have their uses, but receiving Spatial Data is not one of them. What the poster wants to do is not possible. Tim. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Saturday 072807 in Oshkosh Pt 4 - the Eclipse Concept Jet [4/5] - "Eclipse Concept Jet 4.jpg" yEnc (1/1) | Just Plane Noise[_2_] | Aviation Photos | 0 | July 31st 07 04:02 PM |
Saturday 072807 in Oshkosh Pt 4 - the Eclipse Concept Jet [3/5] - "Eclipse Concept Jet 3.jpg" yEnc (1/1) | Just Plane Noise[_2_] | Aviation Photos | 0 | July 31st 07 04:02 PM |
Saturday 072807 in Oshkosh Pt 4 - the Eclipse Concept Jet [2/5] - "Eclipse Concept Jet 2.jpg" yEnc (1/1) | Just Plane Noise[_2_] | Aviation Photos | 0 | July 31st 07 04:02 PM |
Saturday 072807 in Oshkosh Pt 4 - the Eclipse Concept Jet [1/5] - "Eclipse Concept Jet 1.jpg" yEnc (0/1) | Just Plane Noise[_2_] | Aviation Photos | 0 | July 31st 07 04:02 PM |
Saturday 072807 in Oshkosh Pt 4 - the Eclipse Concept Jet [1/5] - "Eclipse Concept Jet 1.jpg" yEnc (1/1) | Just Plane Noise[_2_] | Aviation Photos | 0 | July 31st 07 04:02 PM |