A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

New Condor 2 Landscape for Florida



 
 
Thread Tools Display Modes
  #1  
Old March 22nd 18, 12:45 AM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New Condor 2 Landscape for Florida

Hi,

I just learned that a new Condor 2 Landscape is available for Seminole Lake Florida.
https://www.condor-club.eu/sceneries/197/

However, although I was successful at unzipping and installing the Nephi landscape for Condor 2, I can't seem to figure-out how to get the Florida files to work. They are .7z files. I have a 7z unzip program installed, but it says that the files are not archives or are empty. They are very large files. I'm probably doing something wrong. Or perhaps he files are defective in some way.

The creator is "Andy 1248". Does anyone know who that is?

Best Regards,

Paul Remde

  #2  
Old March 22nd 18, 10:35 AM posted to rec.aviation.soaring
Chris Wedgwood[_2_]
external usenet poster
 
Posts: 100
Default New Condor 2 Landscape for Florida

On Wednesday, March 21, 2018 at 11:45:47 PM UTC, Paul Remde wrote:
Hi,

I just learned that a new Condor 2 Landscape is available for Seminole Lake Florida.
https://www.condor-club.eu/sceneries/197/

However, although I was successful at unzipping and installing the Nephi landscape for Condor 2, I can't seem to figure-out how to get the Florida files to work. They are .7z files. I have a 7z unzip program installed, but it says that the files are not archives or are empty. They are very large files. I'm probably doing something wrong. Or perhaps he files are defective in some way.

The creator is "Andy 1248". Does anyone know who that is?

Best Regards,

Paul Remde


Yes, Andy is active in the Condor Forum Landscape section.

http://www.condorsoaring.com/forums/viewforum.php?f=37
  #3  
Old March 22nd 18, 01:12 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New Condor 2 Landscape for Florida

Aha! I received a tip from the condor-club.eu support person. It is important to know that you must download all 3 Florida files into the same folder first, then right-click on the first one and use 7-Zip to "Extract Here". I had downloaded the first file only and was still downloading the 2nd file when I attempted to unzip the first file. That didn't work. Now that I have downloaded all 3 files into the same directory, I was able to start the unzip process. I can now fly in Condor 2 at Seminole Lake, Florida.

Best Regards,

Paul Remde

On Wednesday, March 21, 2018 at 6:45:47 PM UTC-5, Paul Remde wrote:
Hi,

I just learned that a new Condor 2 Landscape is available for Seminole Lake Florida.
https://www.condor-club.eu/sceneries/197/

However, although I was successful at unzipping and installing the Nephi landscape for Condor 2, I can't seem to figure-out how to get the Florida files to work. They are .7z files. I have a 7z unzip program installed, but it says that the files are not archives or are empty. They are very large files. I'm probably doing something wrong. Or perhaps he files are defective in some way.

The creator is "Andy 1248". Does anyone know who that is?

Best Regards,

Paul Remde


  #4  
Old March 22nd 18, 04:08 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,691
Default New Condor 2 Landscape for Florida

You can see an image of the new Condor 2 landscape for Seminole Lake, Florida he
http://cumulus-soaring.com/condor2.htm#News

Best Regards,

Paul Remde
Cumulus Soaring, Inc.
______________________________

On Wednesday, March 21, 2018 at 6:45:47 PM UTC-5, Paul Remde wrote:
Hi,

I just learned that a new Condor 2 Landscape is available for Seminole Lake Florida.
https://www.condor-club.eu/sceneries/197/

However, although I was successful at unzipping and installing the Nephi landscape for Condor 2, I can't seem to figure-out how to get the Florida files to work. They are .7z files. I have a 7z unzip program installed, but it says that the files are not archives or are empty. They are very large files. I'm probably doing something wrong. Or perhaps he files are defective in some way.

The creator is "Andy 1248". Does anyone know who that is?

Best Regards,

Paul Remde


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Curtiss T-32 Condor II pics 1 [02/11] - 1930s-passengers-boarding-american-airlines-condor-biplane-airplane-AAMYTR.jpg (1/1) Miloch Aviation Photos 0 November 17th 17 03:38 PM
Curtiss T-32 Condor II pics 1 [01/11] - 1007-condor.jpg (1/1) Miloch Aviation Photos 0 November 17th 17 03:38 PM
XCSoar - Portrait / Landscape Peter F[_2_] Soaring 4 July 27th 11 01:48 PM
Lago Terramesh 13 (England & Wales) - holes in landscape? Kevin Reilly Simulators 3 November 11th 03 03:46 PM


All times are GMT +1. The time now is 11:25 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.