Interesting thread in Rec.av.homebuilt about using plywood toform glider

nafod40 wrote:
Might be worth a gander, to see what they're saying.

Didn't JJ have a write-up in Soaring recently about his Baby Bowlus
project? Didn't notice any reference in the thread.

Shawn

Earlier, Shawn wrote:

Didn't JJ have a write-up in Soaring recently
about his Baby Bowlus project? Didn't notice
any reference in the thread.

The way JJ made the pod for his Super Albatross is very different from
the method employed in the production Baby pods. The production pods
were molded plywood veneer made in a mold, while what JJ did was to
skin a series of bulkheads using handcut planks like barrel staves.

Thanks, and best regards to all

Bob K.
http://www.hpaircraft.com/hp-24

"Bob Kuykendall"
egroups.com:

Earlier, Shawn wrote:

Didn't JJ have a write-up in Soaring recently
about his Baby Bowlus project? Didn't notice
any reference in the thread.

The way JJ made the pod for his Super Albatross is very different from
the method employed in the production Baby pods. The production pods
were molded plywood veneer made in a mold, while what JJ did was to
skin a series of bulkheads using handcut planks like barrel staves.

Longitudanally? Not like the prototypes, then, which were scarfed rings,
then?