A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cleveland Parking Brake Parts



 
 
Thread Tools Display Modes
  #1  
Old October 8th 04, 04:05 AM
Jeff
external usenet poster
 
Posts: n/a
Default Cleveland Parking Brake Parts

I have a Cleveland parking brake line lock on my Dragonfly. The part number
is 60-5. It has developed a leak, the fluid is coming out of the body where
the actuator arm connects. I would assume there is an O-ring on either end
of the shaft that goes through the body, but I can not locate a parts
diagram for it. I do not want to take it apart until I am able to obtain
the new seals/O-rings/whatever to make the repair since it is a small leak
and it is not making a mess. Does anyone know where I can obtain the parts
to make the repair? A/S sells the 60-5, but does not list a parts diagram
like they do for the brakes and wheels. I looked for what seemed like hours
at www.parker.com, but that web site is a mess.

Thanks,
Jeff


  #2  
Old October 9th 04, 01:32 AM
JDupre5762
external usenet poster
 
Posts: n/a
Default

I have a Cleveland parking brake line lock on my Dragonfly. The part number
is 60-5. It has developed a leak, the fluid is coming out of the body where
the actuator arm connects.


Snip

I do not want to take it apart until I am able to obtain
the new seals/O-rings/whatever to make the repair since it is a small leak
and it is not making a mess. Does anyone know where I can obtain the parts
to make the repair?


Cleveland gives away a parts book that covers most of its products. I have one
at the office but I won't be there again till Monday. Don't know if it is on
line.

John Dupre'
  #3  
Old October 11th 04, 10:38 PM
JDupre5762
external usenet poster
 
Posts: n/a
Default

I have a Cleveland parking brake line lock on my Dragonfly. The part number
is 60-5. It has developed a leak, the fluid is coming out of the body where
the actuator arm connects.


You need three MS28775-010 orings for the shaft. There are two other orings
for fittings and poppet valves. Those are MS28775-006 and -012. The poppet
valves might fall down into the shaft cavity when the shaft is removed.

John Dupre'
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Goodyear Brake Pucks - Cheap! Ron Wanttaja Home Built 7 July 16th 04 06:45 AM
Building the Po' Boy Bending Brake Veeduber Home Built 14 March 1st 04 07:15 PM
FS: Aircraft Instruments Parts Avionics Warbird Parts Bill Berle Home Built 0 January 10th 04 03:20 AM
Brake caliper flange Stealth Pilot Home Built 5 July 7th 03 04:19 PM
Brake line design question Charlie Smith Home Built 0 July 2nd 03 12:31 PM


All times are GMT +1. The time now is 03:37 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.