Flying the Blériot XI

See photos of one of the world's oldest original flying machines,
a 1909-type Blériot XI flown by Mikael Carlsson -

Daniel K Aviation Images
http://www.daniel-k.com/aviation/

Very nice, what are the specs on that and are the any homebuild plans for
it?


"Daniel Karlsson" wrote in message
...

See photos of one of the world's oldest original flying machines,
a 1909-type Blériot XI flown by Mikael Carlsson -

Daniel K Aviation Images
http://www.daniel-k.com/aviation/

Specs and more info:
http://w1.541.telia.com/~u54103380/frmeset2.htm
I don't think anyone would recommend it for homebuilding,
not if you're thinking of actually flying it...


Bill A. skrev i
diskussionsgruppsmeddelandet:PVcOb.12977$1e.8952@n ewsread2.news.pas.earthlin
k.net...
Very nice, what are the specs on that and are the any homebuild plans for
it?


"Daniel Karlsson" wrote in message
...

See photos of one of the world's oldest original flying machines,
a 1909-type Blériot XI flown by Mikael Carlsson -

Daniel K Aviation Images
http://www.daniel-k.com/aviation/

And then GOD made lucky SOB's... Its amazing that the airframe survived at
all, much less in good condition. I know a few dozen people who would kill
(myself included) to make that kind of discovery.

I've seen a few modern versions offered now and then, but I couldn't reference
any off the top of my head. The French team built one on JYW: Flight of the
Century that looked pretty sweet.

I will offer one piece of advice regarding pioneer aircraft. They can't tell
time. Do not build one unless you are dedicated to the cause. When acurately
reproduced, they exhibit all of the nasty characteristics that they had back in
the day. And that means ground loops, blowovers, stalls in turns when banking
more than 10 degrees, necessary wing walkers, etc. I love my Wright machine to
death, but there are days when its just a raving B#$%H and I wish I could park
it for 10 minutes without having to worry about it blowing away.

Harry

I know Mikael very well, he is not just lucky, he is very avid and have the
skills to make anything, he don't modifi these old planes, it have to be
autentic down to the smallest detail, no nico sleeves, no tail wheel, no
brakes, no "AN" bolts, He also have the ability to get things don. And a
very good pilot, he flies most anything.

When we did the W&B on the Bleriot it showed that the CG was at 50-53%
(memory) of the coord, so the tail have to produce a lot of lift, if the
engine stops, the lack of prop wash on the tail will make the plane come
down like a leaf, you can't dive it to keep the "speed" up.

On his first flight it was only possible to turn in one direction, because
the wings was rigged straight with the stick centered, The torque from that
big propeller and the low airspeed (45-50 MPH) forced him to hold the stick
almost full to one side.

Jan Carlsson
www.jcpropellerdesign.com

"Wright1902Glider" skrev i meddelandet
...
And then GOD made lucky SOB's... Its amazing that the airframe survived
at
all, much less in good condition. I know a few dozen people who would
kill
(myself included) to make that kind of discovery.

I've seen a few modern versions offered now and then, but I couldn't
reference
any off the top of my head. The French team built one on JYW: Flight of
the
Century that looked pretty sweet.

I will offer one piece of advice regarding pioneer aircraft. They can't
tell
time. Do not build one unless you are dedicated to the cause. When
acurately
reproduced, they exhibit all of the nasty characteristics that they had
back in
the day. And that means ground loops, blowovers, stalls in turns when
banking
more than 10 degrees, necessary wing walkers, etc. I love my Wright
machine to
death, but there are days when its just a raving B#$%H and I wish I could
park
it for 10 minutes without having to worry about it blowing away.

Harry

Fun with solid-strand spring steel bracing wires. i still havn't gotten mine
perfect yet.

Harry

The Fuselage is braced by "piano" wires, easy to make, wing is hold by
regular wires (cables) that is spliced. so is the controls surfaces.


Jan Carlsson
www.jcpropellerdesign.com

"Wright1902Glider" skrev i meddelandet
...
Fun with solid-strand spring steel bracing wires. i still havn't gotten
mine
perfect yet.

Harry

Are you using turnbuckles? Unfortunately, I don't have the option of using
them and just have to "pull" all of my wires into place.

Harry