A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

The "offical" LXNAV V7 thread



 
 
Thread Tools Display Modes
  #51  
Old March 1st 14, 04:53 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 1
Default The "offical" LXNAV V7 thread

You need to ensure the baud speed for your logger is the same as the baud speed for the PDA (as the V7 gives the PDA direct access to the logger when declaring a task). This should fix the problem

Chris


On Thursday, 27 February 2014 02:03:11 UTC, ES wrote:
Has anyone had luck uploading tasks from Oudie to V7? This topic isn't discussed in the user guide, and I'm not having any luck repeating the settings in the youtube video on the subject (device = "LXNAV - Nano", interface = "COM4:", speed = "4800bps".



In the video, there is very quick connection and transfer.



When I try it (using the latest V7 firmware and Oudie version), I get "Connecting" on the Oudie, and the communication icon on the V7, but nothing else.



thanks



ted/ES


Ads
  #53  
Old June 3rd 14, 07:10 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 29
Default The "offical" LXNAV V7 thread

Can someone post the wiring diagram to connect the Vertica V2 / Avier to the V7?

Thank you,

Nick
  #54  
Old June 3rd 14, 04:53 PM posted to rec.aviation.soaring
Craig Funston
external usenet poster
 
Posts: 208
Default The "offical" LXNAV V7 thread

On Monday, June 2, 2014 11:10:33 PM UTC-7, wrote:
Can someone post the wiring diagram to connect the Vertica V2 / Avier to the V7?



Thank you,



Nick


Google "glider guider USB/Serial Data Interface" There's a PDF that has the pinouts for the GliderGuider / Vertica V2. The pinouts for the V7 are available at the LXnav website in the V7 manual. I'm assuming you're using a separate GPS source for the V7. I'm not aware of a way to get the GPS data from the Vertica into the V7.

Cheers,
Craig
  #55  
Old June 5th 14, 03:33 PM posted to rec.aviation.soaring
J. Murray
external usenet poster
 
Posts: 16
Default The "offical" LXNAV V7 thread

Howdy. Has anybody had trouble getting the V7 to display glide info from the Oudie lately?

Thanks, Jim
  #56  
Old June 5th 14, 07:10 PM posted to rec.aviation.soaring
Paul Remde
external usenet poster
 
Posts: 1,562
Default The "offical" LXNAV V7 thread

Hi Jim,

I haven't tested it lately, but below is a note about how to get it working.
Some of the settings are not intuitive.
______________

Settings to have the Oudie send GPS data to the V7 and the V7 send vario and
airspeed data to the Oudie.

On the Oudie in the Menu Settings Hardware screen
Device: LXNAV V7
GPS Forwarding: enabled
Use backup GPS: disabled (may not be necessary)

Port Settings
Comm 4, 115200

On the V7 in the Communications screen
GPS-PDA Link: disabled
Auto baudrate: disabled
PDA port baudrate: 115200
GPS port baudrate: 115200

Tested – it works great.

Paul Remde
Cumulus Soaring, Inc.
________________________________________________

"J. Murray" wrote in message
...

Howdy. Has anybody had trouble getting the V7 to display glide info from
the Oudie lately?

Thanks, Jim

  #57  
Old June 5th 14, 09:55 PM posted to rec.aviation.soaring
J. Murray
external usenet poster
 
Posts: 16
Default The "offical" LXNAV V7 thread

I haven't tried disabling the PDA link. That'll be next...

Thanks!
  #58  
Old June 5th 14, 11:25 PM posted to rec.aviation.soaring
Richard[_9_]
external usenet poster
 
Posts: 551
Default The "offical" LXNAV V7 thread

On Thursday, June 5, 2014 1:55:08 PM UTC-7, J. Murray wrote:
I haven't tried disabling the PDA link. That'll be next...



Thanks!


This one worked yesterday.

V7 COM Menu
* Auto Baud checked
* PDA 4800
* GPS 4800
* NMEA enable
Oudie Hardware Menu
* Device V7
* COM 4
* 4800
* Check GPS Forwarding
Oude Input Manual
* Com 4
* 4800

Richard
www.craggyaero.com
  #59  
Old June 6th 14, 01:10 AM posted to rec.aviation.soaring
J. Murray
external usenet poster
 
Posts: 16
Default The "offical" LXNAV V7 thread

That's worth a try too.

Thanks Richard.
  #60  
Old June 6th 14, 08:18 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 29
Default The "offical" LXNAV V7 thread

I'm connecting the 10 pin mini usb from the Avier V2/ Vertica V2 to the V7.

Has anyone installed their own male RJ45 connector on a mini USB to connect the V2 to the LXNAV V7?

I need the pin assignments for both.

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
LXNAV V7 - Reviews? David Reitter Soaring 10 October 21st 14 12:41 AM
New LXNAV LX9000 Overview Video Paul Remde Soaring 0 April 21st 12 01:33 AM
LXNAV V7 Paul Remde Soaring 2 November 2nd 11 12:31 AM
LXNAV Nano and LX 9000 Overview Videos Available Paul Remde Soaring 3 February 28th 11 01:58 PM
HELP! Need offical Blanik L-13 Canopy Strap John Scott Soaring 4 March 3rd 08 05:03 AM


All times are GMT +1. The time now is 01:55 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
Copyright 2004-2018 AviationBanter.
The comments are property of their posters.