Super Cub header tank

I am building an LMA Super Cub and have purchased a new Cub header tank. It
has one threded fitting and one clamp fitting (a projecting tube). I need a
source to explain how it is plumbed. A link to a picture would be great. Any
help out there. Thanks

"Robert Loer" wrote in message
...
I am building an LMA Super Cub and have purchased a new Cub header
tank. It
has one threded fitting and one clamp fitting (a projecting tube). I
need a
source to explain how it is plumbed. A link to a picture would be
great. Any
help out there. Thanks

There are two of those small cylindrical header tanks on the certified
Super Cubs, one forward of the panel and one aft of the cockpit in the
battery compartment. Someone with a parts manual for the L-21
(military version of the Super Cub) can show you how they are plumbed.
I haven't gotten that far with my project.

I am rebuilding a Super Cub and this is a great resource from
Christian Sturm:
http://www.supercubproject.com/drawings/main.aspx

On Feb 18, 2:01 am, "Robert Loer" wrote:
I am building an LMA Super Cub and have purchased a new Cub header tank. It
has one threded fitting and one clamp fitting (a projecting tube). I need a
source to explain how it is plumbed. A link to a picture would be great. Any
help out there. Thanks


Starting on page 65:
http://www.supercubproject.com/downl...t_Handbook.pdf
5.5 MB

Daniel

wrote:

On Feb 18, 2:01 am, "Robert Loer" wrote:

I am building an LMA Super Cub and have purchased a new Cub header tank. It
has one threded fitting and one clamp fitting (a projecting tube). I need a
source to explain how it is plumbed. A link to a picture would be great. Any
help out there. Thanks



Starting on page 65:
http://www.supercubproject.com/downl...t_Handbook.pdf
5.5 MB

Daniel



Man! I wish I had had all that information when I built my Cuby...

Richard