If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
B40 rf interference problem
John, The advice about rf floating around your cockpit is all good. With a good radio/co-ax/antenna the B40 with DAD should not be having any transmit troubles. We had one B40 in an ASW19 in Japan that had a similar problem which was traced to improper termination of the BNC connector on the coax where it plugged in to the radio. Fixing the coax problem made the rf problem go away. When putting a BNC connector on to a piece of coax refer to the manufacturers' instructions. It isn't at all obvious how it should be done properly. Mike Borgelt -- mborgelt ------------------------------------------------------------------------ Posted via OziPilots Online [ http://www.OziPilotsOnline.com.au ] - A website for Australian Pilots regardless of when, why, or what they fly - |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GEM 1200 Problem | Jim Kaufeld | Owning | 11 | March 22nd 04 03:54 AM |
A problem in the Military ? | Nick Jade | Military Aviation | 54 | March 15th 04 07:59 PM |
RF interference issue again (esp. for E Drucker and Jim Weir and other RF wizards) | Snowbird | Home Built | 78 | December 3rd 03 09:10 PM |
RF interference issue again (esp. for E Drucker and Jim Weir and other RF wizards) | Snowbird | Owning | 77 | December 3rd 03 09:10 PM |
Radio Interference Information | Ross Richardson | Piloting | 0 | October 17th 03 02:06 PM |