A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Owning
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Can hydraulic lifters cause inadequate full power?



 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old October 13th 08, 06:31 PM posted to rec.aviation.owning
[email protected]
external usenet poster
 
Posts: 1,130
Default Can hydraulic lifters cause inadequate full power?

On Oct 12, 8:03 pm, wrote:

We've put new points and condensers in both, including internally (and
of course externally) timing them. No change. I've done full-power mag checks
and misfires would be apparent in that case. New plugs make no change, either.


One other possibility: A bad plug lead or two. They can be open
(arcing internally) or shorted (arcing to the coax). They often won't
show up on mag checks but will, like a bad resistor in a plug, cause
some roughness if trhe mags aren't timed pretty close together. The
firing of the early mag can create enough pressure rise that the
second has trouble firing its plugs. I would doubt that yours are that
far apart.


: If the carb is a Marvel Schebler/Precision Airmotive unit, have
: the ADs been done with regard to the two-piece venturi and fuel
: nozzle?

Venturi AD's checked and CW. Restriction or mixture would show up as low
MP or abnormal EGTs anyway, no? Neither is the present.


The two-piece venturi had the risk of losing its secondary
venturi into the engine. The AD-mandated one-piece has squared-off
support arms that disrupt airflow around the nozzle and a second AD
required a new nozzle to try to fix this. The new nozzle made things
worse on some engines, so a third AD allowed the reinstallation of the
old venturis and nozzles, to be checked every 100 hours for looseness.
Except that Precision had recalled all the old parts and crunched
them. I know of one rebuilder that dresses the secondary support arms
and achieves better running. EGTs won't show anything, since it's
random turbulence around the venturi that screws up the atomization.
My 60-year-old Bendix/Stromberg is a better carb than any of
these MA-3s or -4s. What does all the money get us? Maybe Tempest will
fix these problems. They've purchased the carb line from Precision.


Dan
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Hydraulic Pump [email protected] General Aviation 2 March 28th 06 05:09 AM
Power setting table and best economy/best power... xerj Piloting 29 October 20th 05 02:44 AM
Heavy lifters... Darrel Toepfer Rotorcraft 2 August 13th 05 10:20 PM
wanted-Melling part number 29840 solid lifters-Chevy V-8 [email protected] Home Built 1 March 9th 05 03:52 AM
Radio protocol regarding full stops on full stop only nights Ben Hallert Piloting 33 February 9th 05 07:52 PM


All times are GMT +1. The time now is 03:45 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.