If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
Becker AR4201 Radio Transmission Problem
Today, after curing a ground problem with the antenna end connector, we were able to transmit on frequencies from 127 to 136. So we know the wiring is ok, but the radio won't transmit from 118 to just below 127. According to another case, the radio is not at fault and the solution is to upgrade the cable and re-crimp. So this will be the next step.
Any suggestions are welcome. RMM |
#12
|
|||
|
|||
Becker AR4201 Radio Transmission Problem
Late this afternoon, we substituted with another antenna that is proven to be fully working. The same condition resulted. Below 127, the radio opens the transmission channel (the PTT click is audible and the radio displays a black triangle indicating transmission) but carries no voice. Above 127, transmission is fine. This leaves the radio as the place with a faulty part. Will call Becker first thing on Monday morning.
RMM |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Becker AR4201 | Robin Birch[_2_] | Soaring | 0 | April 21st 14 06:22 PM |
Becker AR4201 | Robin Birch[_2_] | Soaring | 0 | April 21st 14 05:11 PM |
BECKER AR4201 | guts | Soaring | 1 | April 23rd 12 08:50 PM |
Becker AR4201 tuning problem | Hellman | Soaring | 2 | October 17th 08 11:14 PM |
VHF Becker AR4201 | Philippe | Home Built | 2 | July 9th 04 08:30 PM |