A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Looking for Jim Dobberful



 
 
Thread Tools Display Modes
  #1  
Old August 13th 08, 01:40 AM posted to rec.aviation.soaring
Scott Alexander
external usenet poster
 
Posts: 7
Default Looking for Jim Dobberful

Does anyone have any contact information on Jim Dobberful?

Last I heard, he was working for Boeing as an aeronautical engineer and
flying a Nimbus 3 around Seattle, WA.

I am contemplating refinishing a glider this winter. I helped Jim
refinish an ASW-19 when I was in high school. I'd like to get some
advise from him on this matter.

If anyone has an email or phone number, please contact me at
or call 901-270-6099.

Thanks!
  #2  
Old August 13th 08, 05:40 AM posted to rec.aviation.soaring
James C. Simmons[_2_]
external usenet poster
 
Posts: 6
Default Looking for Jim Dobberful

At 00:40 13 August 2008, Scott Alexander wrote:
Does anyone have any contact information on Jim Dobberful?

Last I heard, he was working for Boeing as an aeronautical engineer and
flying a Nimbus 3 around Seattle, WA.

I am contemplating refinishing a glider this winter. I helped Jim
refinish an ASW-19 when I was in high school. I'd like to get some
advise from him on this matter.

If anyone has an email or phone number, please contact me at
or call 901-270-6099.

Thanks!

Jim is still working for Boeing, but he is now in Italy.
  #3  
Old August 13th 08, 05:40 AM posted to rec.aviation.soaring
James C. Simmons[_2_]
external usenet poster
 
Posts: 6
Default Looking for Jim Dobberful

At 00:40 13 August 2008, Scott Alexander wrote:
Does anyone have any contact information on Jim Dobberful?

Last I heard, he was working for Boeing as an aeronautical engineer and
flying a Nimbus 3 around Seattle, WA.

I am contemplating refinishing a glider this winter. I helped Jim
refinish an ASW-19 when I was in high school. I'd like to get some
advise from him on this matter.

If anyone has an email or phone number, please contact me at
or call 901-270-6099.

Thanks!

Jim is still working for Boeing, but he is now in Italy.
  #4  
Old August 13th 08, 05:55 AM posted to rec.aviation.soaring
James C. Simmons[_2_]
external usenet poster
 
Posts: 6
Default Looking for Jim Dobberful

At 00:40 13 August 2008, Scott Alexander wrote:
Does anyone have any contact information on Jim Dobberful?

Last I heard, he was working for Boeing as an aeronautical engineer and
flying a Nimbus 3 around Seattle, WA.

I am contemplating refinishing a glider this winter. I helped Jim
refinish an ASW-19 when I was in high school. I'd like to get some
advise from him on this matter.

If anyone has an email or phone number, please contact me at
or call 901-270-6099.

Thanks!

Jim is still working for Boeing, but he is now in Italy.
  #5  
Old August 13th 08, 05:55 AM posted to rec.aviation.soaring
James C. Simmons[_2_]
external usenet poster
 
Posts: 6
Default Looking for Jim Dobberful

At 00:40 13 August 2008, Scott Alexander wrote:
Does anyone have any contact information on Jim Dobberful?

Last I heard, he was working for Boeing as an aeronautical engineer and
flying a Nimbus 3 around Seattle, WA.

I am contemplating refinishing a glider this winter. I helped Jim
refinish an ASW-19 when I was in high school. I'd like to get some
advise from him on this matter.

If anyone has an email or phone number, please contact me at
or call 901-270-6099.

Thanks!

Jim is still working for Boeing, but he is now in Italy.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:42 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.