A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Home Built
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Aluminum vs Fiberglass landing gear - Pro's and cons.



 
 
Thread Tools Display Modes
  #1  
Old November 22nd 03, 07:24 AM
Bart D. Hull
external usenet poster
 
Posts: n/a
Default Aluminum vs Fiberglass landing gear - Pro's and cons.

I'm in the process of building a Team Tango (similar to a Glasair IIFG) and have
a few thoughts about the landing gear. The earlier kits had fiberglass "legs"
and the newer kits have aluminum legs.

I flew in a Tango with the aluminum gear and it seemed quite harsh on landing. I
know aluminum gear doesn't have problems with heat transferred from the brakes
or axle getting things too hot and that the gear can be "gun drilled" to have
they hydraulic lines inside the gear itself with just a small connector hose
from the gear leg to the brake caliper.

Does the aluminum gear have less ability to absorb shock?

Does the fiberglass or aluminum gear take a "set" after awhile setting on a ramp?

Problems with brake lines on fiberglass gear? on aluminum gear.

How do you match the appropriate gear to the airplanes weight?

Can aluminum gear be had in a "aerodynamic" tear drop shape or just a
bent bar.

Any other suggestions would be appreciated. ( pertaining to the gear )

--
Bart D. Hull

Tempe, Arizona

Check
http://www.inficad.com/~bdhull/engine.html
for my Subaru Engine Conversion
Check http://www.inficad.com/~bdhull/fuselage.html
for Tango II I'm building.

Ads
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 09:54 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 AviationBanter.
The comments are property of their posters.