If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#12
|
|||
|
|||
lead tail ballast
Ron (RW) wrote:
I purchased a BRASS tailwheel from DG, out of Calistoga CA. Cost me ~$90, but was plug and Play for my DG200's tailwheel. The entire weight of the wheel, tube and tire came to 6.9 lbs, with the wheel itself weighing in at 6 lbs even. That must have been long ago, or Oliver is clearing them out of his shop, as they cost something like 350 euros new from the factory. I had a local machine shop turn one for me a few years back for $120 (most of the cost was the brass), they took some measurements off the plastic wheel, and had it for me the next day... Marc |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Air Force One Had to Intercept Some Inadvertent Flyers / How? | Rick Umali | Piloting | 29 | February 15th 06 04:40 AM |
I want to build the most EVIL plane EVER !!! | Eliot Coweye | Home Built | 237 | February 13th 06 03:55 AM |
Most reliable homebuilt helicopter? | tom pettit | Home Built | 35 | September 29th 05 02:24 PM |
Mini-500 Accident Analysis | Dennis Fetters | Rotorcraft | 16 | September 3rd 05 11:35 AM |
Nearly had my life terminated today | Michelle P | Piloting | 11 | September 3rd 05 02:37 AM |