A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Restoration
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Aeronca Chief Gear Alignment?



 
 
Thread Tools Display Modes
  #1  
Old July 8th 03, 04:57 AM
Richard Lamb
external usenet poster
 
Posts: n/a
Default Aeronca Chief Gear Alignment?

The airplane is very nice, but the gear shows a degree or so
of toe in.
The owner seems to be having trouble with it (although I don't)

Anybody know either how to adjust the gear alignment?

Richard
  #2  
Old July 8th 03, 06:04 PM
Richard Lamb
external usenet poster
 
Posts: n/a
Default

Yeah, but I don't want to get into that old argument again.
Personally, I've flown them both ways with only slight differences
in pilot technique.

But this guy ground looped her, and now feels the need to "fix" it.

So we are going to rig her wheels straight ahead.

But I don't know how to do that on a Chief...

Richard


john price wrote:

Richard...

There's been a lot of discussion about toe-in vs. toe-out on the NAA
message board (http://www.aeroncapilots.com/disc/)... There's also
some discussion of this in one of Charlie Lasher's books...

John Price
CFII/AGI/IGI
http://home.att.net/~jm.price

"Richard Lamb" wrote in message
...
The airplane is very nice, but the gear shows a degree or so
of toe in.
The owner seems to be having trouble with it (although I don't)

Anybody know either how to adjust the gear alignment?

Richard

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"You Might be a Crew Chief if..." Yeff Military Aviation 36 December 11th 03 04:07 PM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 1 November 24th 03 02:46 PM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 2 November 24th 03 05:23 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart Hull Home Built 0 November 24th 03 03:52 AM
Aluminum vs Fiberglass landing gear - Pro's and cons. Bart D. Hull Home Built 0 November 22nd 03 06:24 AM


All times are GMT +1. The time now is 04:29 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.