If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#12
|
|||
|
|||
OLC max altitude self censorship
On Thursday, February 28, 2019 at 2:47:54 PM UTC-6, kirk.stant wrote:
Roy, I would bet your PF is not sending any data to your Oudie; which would explain your indications - the log file is using the Oudie's GPS to make the trace. I don't have my Oudie with me right now, but there is a page you can check to see what data is coming in to it; I would look there. If all works correctly, you will get pressure alt and Flarm/ADS-B/PCAS targets on your Oudie display. Kirk 66 Thanks Kirk, That was indeed the root cause. Dave Springford guided me through the proper settings on the Oudie. After selecting the proper settings, the Oudie reads the pressure altitude and the Flarm display is visible on the Oudie. This is with the glider sitting indoors. I'm very hopeful that the targets will show in flight! Thanks again, Roy |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Good News on Delorme InReach (2 min tracking and altitude vs. Spot w/10 min tracking and no altitude) | Sean F (F2) | Soaring | 34 | February 24th 13 12:46 AM |
Vector altitude for ILS below GS intercept altitude? | M | Instrument Flight Rules | 23 | May 20th 06 07:41 PM |
GPS altitude vs altimeter altitude | Chris W | Piloting | 37 | April 19th 06 10:45 AM |
More Government censorship | [email protected] | Owning | 12 | March 14th 06 08:28 PM |
Pressure Altitude or Density Altitude | john smith | Piloting | 3 | July 22nd 04 10:48 AM |