A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

ILEC SN10 v2.44 released



 
 
Thread Tools Display Modes
  #1  
Old July 14th 18, 09:33 PM posted to rec.aviation.soaring
Dave Nadler
external usenet poster
 
Posts: 1,610
Default ILEC SN10 v2.44 released

ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/

Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)
  #2  
Old July 14th 18, 11:57 PM posted to rec.aviation.soaring
AS
external usenet poster
 
Posts: 653
Default ILEC SN10 v2.44 released


This marks 21 years of continual updates and service ;-)


Thank you for that! Being a relatively new user of an SN10b (my glider came with one), I had a few incidents where I was sure I killed the instrument. Dave had the correct answers for me within a few minutes after I sent him an email describing what the unit was doing - or not doing.
Dave - please quit hopping out of gliders, will you? ;-)

Uli
'AS'
  #3  
Old July 15th 18, 02:47 AM posted to rec.aviation.soaring
Karl Striedieck[_2_]
external usenet poster
 
Posts: 146
Default ILEC SN10 v2.44 released

Thanks for that 21 years Dave. None out there like you!

KS

On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/

Enjoy!
Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)


  #4  
Old July 15th 18, 03:12 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 580
Default ILEC SN10 v2.44 released

On Saturday, July 14, 2018 at 9:47:56 PM UTC-4, Karl Striedieck wrote:
Thanks for that 21 years Dave. None out there like you!

KS


Same. I've never actually bought one of Dave's SN10s (sorry...) but he has nevertheless provided advice on a handful of technical problems I've had over the years (e.g., with FLARM).

Then there's his timeless May 1987 safety article that I provided to the participants at R2N last month following up on a safety talk. Indeed, he has an enviable record...and is alive to keep adding to it!!!

Chip Bearden
  #5  
Old July 15th 18, 05:02 AM posted to rec.aviation.soaring
JS[_5_]
external usenet poster
 
Posts: 624
Default ILEC SN10 v2.44 released

Thanks for staying above ground Dave.
Does v2.44 have the option "no sink tone in climb mode"????
Jim
  #6  
Old July 15th 18, 07:04 PM posted to rec.aviation.soaring
Dave Nadler
external usenet poster
 
Posts: 1,610
Default ILEC SN10 v2.44 released

On Sunday, July 15, 2018 at 12:02:25 AM UTC-4, JS wrote:
Does v2.44 have the option "no sink tone in climb mode"????


The SN10 has the "KS no bad news" option since 2003.
That suppresses the "speed-up" audio signal in cruise.
But if you insist on circling in sink the SN10 still reminds you ;-)

  #7  
Old July 15th 18, 09:06 PM posted to rec.aviation.soaring
Jonathan St. Cloud
external usenet poster
 
Posts: 1,463
Default ILEC SN10 v2.44 released

On Saturday, July 14, 2018 at 6:47:56 PM UTC-7, Karl Striedieck wrote:
Thanks for that 21 years Dave. None out there like you!

KS

On Saturday, July 14, 2018 at 4:33:43 PM UTC-4, Dave Nadler wrote:
ILEC SN10/SN10B version 2.44 is now available at:
http://www.nadler.com/sn10/SN10_Resource_Index.html
Details available in README at the above site.

Please note: If you are using FLARM with SN10 and
a PDA, Oudie, TopHat, etc:
make SURE to update your FLARM to version 6.60 available he
https://flarm.com/support/firmware-u...load-firmware/
Enjoy!

Best Regards, Dave

PS: This marks 21 years of continual updates and service ;-)


Just for a frame of reference, Windows XP was officially supported for 12 years.

https://support.microsoft.com/en-us/...end-of-support
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ILEC SN10/SN10B version 2.42 released Dave Nadler Soaring 2 June 5th 17 11:58 AM
ILEC SN10 version 2.41 released Dave Nadler Soaring 0 July 13th 16 12:47 AM
ILEC SN10 version 2.38 released Dave Nadler Soaring 0 May 22nd 13 08:13 PM
Ilec SN10 K Soaring 1 September 15th 12 03:16 AM
Ilec SN10 question John Ferguson Soaring 3 May 29th 07 05:11 AM


All times are GMT +1. The time now is 06:02 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.