|
| If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|||||||
|
|
Thread Tools | Display Modes |
|
#2
February 24th 07, 08:49 PM
posted to rec.aviation.homebuilt
|
|||
|
|||
ELT turns on with comm transmitting ???
Russell: Some Diamond DA-40s have a similar problem. It seems to be
related to routing of the radio coax near the ELT control wiring. They came out with a Service Bulletin which is bsically putting a split ferrite on the control cable near the E-01. Here is the link: http://80.121.174.62/support/PDF/DA4.../RSB40-045.pdf 
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| re urgent aog request need urgent pin out dia for KTR 900 a/c not transmitting on P1 P2 ok | Stevenatherton | Owning | 0 | November 20th 04 07:36 AM |
| re urgent aog request need urgent pin out dia for KTR 900 a/c not transmitting on P1 P2 ok | Stevenatherton | Aviation Marketplace | 0 | November 20th 04 07:33 AM |
| Airplane turns | Dave | Piloting | 18 | April 19th 04 08:02 PM |
| Canyon Turns | Marc Lattoni | Piloting | 35 | March 19th 04 06:02 PM |
| Slipping in Turns | Jim Hendrix | Soaring | 16 | November 30th 03 04:39 PM |
Threaded Mode