A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

LS-3 Wing pins and seals wanted.



 
 
Thread Tools Display Modes
  #1  
Old January 21st 21, 02:45 AM posted to rec.aviation.soaring
S T
external usenet poster
 
Posts: 1
Default LS-3 Wing pins and seals wanted.

Working on an LS-3 project. Lost the wing pins and need replacements if anyone has a set to spare. Also need to source the internal seals between the wing and flaperons. Anyone got any leads?
  #2  
Old January 21st 21, 05:07 AM posted to rec.aviation.soaring
Me
external usenet poster
 
Posts: 17
Default LS-3 Wing pins and seals wanted.

On Wednesday, January 20, 2021 at 8:45:20 PM UTC-5, S T wrote:
need to source the internal seals between the wing and flaperons. Anyone got any leads?

http://www.streifly.de/shop%20abdichtsaetze-e.htm

  #3  
Old January 21st 21, 03:38 PM posted to rec.aviation.soaring
Nicholas Kennedy
external usenet poster
 
Posts: 78
Default LS-3 Wing pins and seals wanted.

Another source in the USA

http://craggyaero.com/misc1.htm

Nick
T
  #4  
Old January 21st 21, 07:01 PM posted to rec.aviation.soaring
John Sinclair[_5_]
external usenet poster
 
Posts: 88
Default LS-3 Wing pins and seals wanted.

On Thursday, January 21, 2021 at 6:38:58 AM UTC-8, wrote:
Another source in the USA

http://craggyaero.com/misc1.htm

Nick
T

I have a set of LS-3 main wing pins, some rust and minor pitting that can easily be cleaned up. Email me atjonnsinclair210(at)yahoo.com for photo..........no charge, just pay the shipping.
JJ
  #5  
Old January 22nd 21, 12:57 AM posted to rec.aviation.soaring
Bob Kuykendall
external usenet poster
 
Posts: 1,345
Default LS-3 Wing pins and seals wanted.

On Thursday, January 21, 2021 at 10:01:35 AM UTC-8, John Sinclair wrote:
I have a set of LS-3 main wing pins...


My advice is to run, not walk, in the direction of that offer. There is usually a generous margin to the design of wing main pins, so some minor pitting shouldn't be an issue. And in the very unlikely event they are rusted beyond use, you can still use them as exemplars to have a set of duplicates made.

--Bob K.
  #6  
Old January 22nd 21, 04:15 PM posted to rec.aviation.soaring
John Sinclair[_5_]
external usenet poster
 
Posts: 88
Default LS-3 Wing pins and seals wanted.

On Thursday, January 21, 2021 at 10:01:35 AM UTC-8, John Sinclair wrote:
On Thursday, January 21, 2021 at 6:38:58 AM UTC-8, wrote:
Another source in the USA

http://craggyaero.com/misc1.htm

Nick
T

I have a set of LS-3 main wing pins, some rust and minor pitting that can easily be cleaned up. Email me atjonnsinclair210(at)yahoo.com for photo..........no charge, just pay the shipping.
JJ


Oops, email me at johnsinclair210.......Not jonnsinclair210....


!
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Lp-49 Taper Pins and wing mounting. [email protected] Soaring 1 July 17th 18 06:48 AM
Grob 109 wing pins Bob Jenneson Soaring 6 April 11th 09 10:45 PM
Grob 109 wing pins BT Soaring 0 February 7th 09 06:05 AM
Piper Cherokee wing root seals - just an fyi Bob Noel Owning 1 May 7th 06 01:12 PM
Mylar tape wing seals - effect on wing performance Simon Waddell Soaring 8 January 1st 04 04:46 PM


All times are GMT +1. The time now is 03:14 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.