If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
best magnetic/clip-style retaining screw/nut drivers?
On Mon, 02 Feb 2004 01:53:49 GMT, Erik wrote:
In article , "SawEyes" wrote: What I usually do is take an ordinary screwdriver and slide a magnet over Yes this is a good idea. Maybe not exactly what you are looking for, but its handy to have magnetized screwdriving tips for driving screws in all the Only snag is stuff like the stainless screws they use around automotive headlights... Those are a 400 series in my Ford and Chevy and are hels quite well by my magnetic tip. |
#2
|
|||
|
|||
|
Thread Tools | |
Display Modes | |
|
|