If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Garmin 430 "Approach Not Active"
Yesterday I flew two approaches with my GNS 430, the RNAV (GPS) RWY 03
at KCHO, and the RNAV (GPS) RWY 24 at KROA. In both cases, the 430 reported "Approach Not Active" just s I reached the FAF (JAGAG at CHO and HIBAN at ROA), and stopped sequencing. I am quite certain that I activated both approaches when I added them to the flight plan (not just "Loaded" them). It was VMC+ at each airport, so I just continued to landing both times. I didn't get any other warnings or messages from the 430. Any ideas on why the 430 may have stopped sequencing at the FAF on my approaches? I re-read the Pilot's Guide, but if there's something related there I didn't see it. Thanks, Dave |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Approach Question- Published Missed Can't be flown? | Brad Z | Instrument Flight Rules | 8 | May 6th 04 04:19 AM |
Why is ADF or Radar Required on MFD ILS RWY 32 Approach Plate? | S. Ramirez | Instrument Flight Rules | 17 | April 2nd 04 11:13 AM |
Garmin 530 VOR Approach Using GPS or VLOC | Rich | Instrument Flight Rules | 3 | November 28th 03 04:08 AM |
Garmin DME arc weidnress | Dave Touretzky | Instrument Flight Rules | 5 | October 2nd 03 02:04 AM |
Garmin Behind the Curve on WAAS GPS VNAV Approaches | Richard Kaplan | Instrument Flight Rules | 24 | July 18th 03 01:43 PM |