A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Anyone have a Grob 103 Twin II handy to take a couple of measurements?



 
 
Thread Tools Display Modes
  #1  
Old June 11th 15, 03:29 PM posted to rec.aviation.soaring
Papa3[_2_]
external usenet poster
 
Posts: 753
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

I need the following:

- Chord at the root
- Chord at the tip
- Semi-span including spar (so from wingtip to opposite side of fuselage)
- Chord of vertical stabilizer plus rudder
- Height of vertical stabilizer plus rudder (bottom of fuselage to top of vertical stabilizer)

Thanks in advance if anyone can do this.

P3
  #2  
Old June 11th 15, 05:29 PM posted to rec.aviation.soaring
Steve Leonard[_2_]
external usenet poster
 
Posts: 1,076
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

Three view, ruler, calculator, but no spreadsheet. :-)

  #3  
Old June 11th 15, 07:00 PM posted to rec.aviation.soaring
Papa3[_2_]
external usenet poster
 
Posts: 753
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

On Thursday, June 11, 2015 at 12:29:56 PM UTC-4, Steve Leonard wrote:
Three view, ruler, calculator, but no spreadsheet. :-)


Yeah, I thought of that. The three view I have leaves me a little suspicious on the fidelity of the drawing vs. the real thing. Probably good enough for my purposes (trailer dimensioning).

P3
  #4  
Old June 11th 15, 07:18 PM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 19
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

On Thursday, June 11, 2015 at 2:00:55 PM UTC-4, Papa3 wrote:
On Thursday, June 11, 2015 at 12:29:56 PM UTC-4, Steve Leonard wrote:
Three view, ruler, calculator, but no spreadsheet. :-)


Yeah, I thought of that. The three view I have leaves me a little suspicious on the fidelity of the drawing vs. the real thing. Probably good enough for my purposes (trailer dimensioning).

P3


Try these guys, they might know :-)

E-Mail:
www.ltb-lindner.com

They also have drawings at
http://www.ltb-lindner.com/drawings.html


Are you not able to go to the airport right now ?

Todd
  #5  
Old June 11th 15, 07:44 PM posted to rec.aviation.soaring
Dave Nadler
external usenet poster
 
Posts: 1,610
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

On Thursday, June 11, 2015 at 12:29:56 PM UTC-4, Steve Leonard wrote:
Three view, ruler, calculator, but no spreadsheet. :-)


Reminds of a guy I know who built a trailer for his Libelle from
the 3-view. It was pretty funny when he tried to roll the Libelle
into his just completed trailer, only to find the tail didn't fit!
The 3-view showed the original somewhat shorter vertical tail.

See ya, Dave

PS: No, I'm not going to tell you who that was...
  #6  
Old June 11th 15, 08:32 PM posted to rec.aviation.soaring
Papa3[_2_]
external usenet poster
 
Posts: 753
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

On Thursday, June 11, 2015 at 2:18:23 PM UTC-4, wrote:
On Thursday, June 11, 2015 at 2:00:55 PM UTC-4, Papa3 wrote:
On Thursday, June 11, 2015 at 12:29:56 PM UTC-4, Steve Leonard wrote:
Three view, ruler, calculator, but no spreadsheet. :-)


Yeah, I thought of that. The three view I have leaves me a little suspicious on the fidelity of the drawing vs. the real thing. Probably good enough for my purposes (trailer dimensioning).

P3


Try these guys, they might know :-)

E-Mail:
www.ltb-lindner.com

They also have drawings at
http://www.ltb-lindner.com/drawings.html


Are you not able to go to the airport right now ?

Todd


Thanks - hadn't seen the dimensioned drawings before. This will do it for my purposes. I'll compare to the real article tomorrow.

P3
  #7  
Old June 12th 15, 02:46 AM posted to rec.aviation.soaring
Bill T
external usenet poster
 
Posts: 275
Default Anyone have a Grob 103 Twin II handy to take a couple of measurements?

M&M Manufacturing in Moriarity has built a couple of open trailers for the Grob 103. I think he may know the dimensions.
BillT
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
how much for Grob 103 twin III Segelflieger Soaring 8 April 10th 14 04:26 PM
WANTED: Twin Grob Scott Alexander[_2_] Soaring 0 March 29th 13 12:31 PM
Grob Twin III Must read! [email protected] Soaring 3 June 9th 08 07:08 AM
gratis jamba handyvideo lustige jamba videos fuer handy jamba videoin handy format jamba handy video 3gp jamba handy videos free download jambahandy video schuelerin [email protected] Piloting 0 May 25th 08 01:00 PM
jamba handyspiele jamba handy games for free jamba handy spielkostenlos jamba handy spiele torrent jamba handy spiele auf pc jamba spielefuers handy [email protected] Piloting 0 May 24th 08 11:44 AM


All times are GMT +1. The time now is 01:56 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AviationBanter.
The comments are property of their posters.