We had our Archer II done at a small shop at South Fulton
airpark (under the departure stream of ATL's 28L). That was
about 6 years ago, and it still looks pretty good, except for the
normal fiberglass crazing, etc. I think the basic paint job
was right at $4200. Was in the shop for a little less than 2 weeks.
If you want to take a look, hop over to RYY, look for 44979
on the north ramp area.
Mike

Stephen N Mills wrote:
Baby needs a new pair of shoes...
Well, not really. She needs a new coat.

Our Cardinal ('75 RG) is to the point of needing a paint job. She
sits on a tie-down at PDK (Atlanta) and flies, occasionaly, thru
clouds and rain. And it shows.

We are looking for recommendations and pireps on painting. We are
planning a basic white with green (or red) scheme as she has now. We
do not ever expect to get to the top of the hanger-waiting-list, so we
don't want to spend mucho bucks for the
paint-job-to-end-all-paint-jobs. And, of course, we don't want it to
all peel off in two years. What we're after is a good, basic,
middle-of-the-line paint job.

We are posting here looking for:

1- Paint shop recommendations (near PDK?)
2- Cost estimates
3- Down-time estimates
4- Other advice

Steve
(1/3 owner of N2679V, "Vicky", for one year as of tomorrow)