math problem-slightly OT

[Brad[_2_]]

ok, I'm pretty math challenged....so here goes......I'm about ready to
start power cutting/buffing my HP-24 horiz stabilizer..............the
RPM range for my power buffer is 1000 to 3000 rpm. the rotary knob on
the power buffer is numbered from 1 to 6.

I am pretty sure that number 1 would be 1000 rpm and number 6 would be
3000 rpm. the rubbing compound and the polishing compounds require
specific rpm settings.............sooooooooo.........

my question is what rpm settings would I get from numbers 2 thru 5?

and don't tell me that I my Harbor Fraud power buffer is the
problem........:)

Brad

[Tony[_5_]]

On Sep 14, 3:32*pm, Brad > wrote:
> ok, I'm pretty math challenged....so here goes......I'm about ready to
> start power cutting/buffing my HP-24 horiz stabilizer..............the
> RPM range for my power buffer is 1000 to 3000 rpm. the rotary knob on
> the power buffer is numbered from 1 to 6.
>
> I am pretty sure that number 1 would be 1000 rpm and number 6 would be
> 3000 rpm. the rubbing compound and the polishing compounds require
> specific rpm settings.............sooooooooo.........
>
> my question is what rpm settings would I get from numbers 2 thru 5?
>
> and don't tell me that I my Harbor Fraud power buffer is the
> problem........:)
>
> Brad

(3000-1000)/(6-1) = 400 RPM increments, assuming that it is a linear
scale.

1 - 1000
2 - 1400
3 - 1800
4 - 2200
5 - 2600
6 - 3000

do you have one of those guns that people use to determine the RPM of
their propellers or fan blades or anything else that spins? Might be
able to get it to read the RPM of your buffer to make sure that the
knob is in fact a linear scale.

[[email protected]]

On Sep 14, 4:32*pm, Brad > wrote:
> ok, I'm pretty math challenged....so here goes......I'm about ready to
> start power cutting/buffing my HP-24 horiz stabilizer..............the
> RPM range for my power buffer is 1000 to 3000 rpm. the rotary knob on
> the power buffer is numbered from 1 to 6.
>
> I am pretty sure that number 1 would be 1000 rpm and number 6 would be
> 3000 rpm. the rubbing compound and the polishing compounds require
> specific rpm settings.............sooooooooo.........
>
> my question is what rpm settings would I get from numbers 2 thru 5?
>
> and don't tell me that I my Harbor Fraud power buffer is the
> problem........:)
>
> Brad

Turn it up till it burns gelcoat- then slow down.
That's how everybody does it.
UH

[Brad[_2_]]

On Sep 14, 1:50*pm, Tony > wrote:
> On Sep 14, 3:32*pm, Brad > wrote:
>
> > ok, I'm pretty math challenged....so here goes......I'm about ready to
> > start power cutting/buffing my HP-24 horiz stabilizer..............the
> > RPM range for my power buffer is 1000 to 3000 rpm. the rotary knob on
> > the power buffer is numbered from 1 to 6.
>
> > I am pretty sure that number 1 would be 1000 rpm and number 6 would be
> > 3000 rpm. the rubbing compound and the polishing compounds require
> > specific rpm settings.............sooooooooo.........
>
> > my question is what rpm settings would I get from numbers 2 thru 5?
>
> > and don't tell me that I my Harbor Fraud power buffer is the
> > problem........:)
>
> > Brad
>
> (3000-1000)/(6-1) = 400 RPM increments, assuming that it is a linear
> scale.
>
> 1 - 1000
> 2 - 1400
> 3 - 1800
> 4 - 2200
> 5 - 2600
> 6 - 3000
>
> do you have one of those guns that people use to determine the RPM of
> their propellers or fan blades or anything else that spins? *Might be
> able to get it to read the RPM of your buffer to make sure that the
> knob is in fact a linear scale.

thanks guys............don't have one of those rpm guns, I'll use the
400 rpm change per click and make sure I don't burn the gel-
coat...................HANK..............you know how hard I've
struggled to get a nice looking gelcoat...........BURN
IT!.................no way...........:)

Cheers,
Brad

[KevinFinke]

Hey Brad, I don't think Hank was implying that you burn the whole
thing, and then turn it down.

Surely you must have a test part that you could use? Maybe Dan could
loan you his cirrus horizontal for a weekend. ;)

-Kevin

[Dave Nadler]

On Sep 14, 4:32*pm, Brad > wrote:
> ok, I'm pretty math challenged....so here goes......I'm about ready to
> start power cutting/buffing my HP-24 horiz stabilizer..............the
> RPM range for my power buffer is 1000 to 3000 rpm. the rotary knob on
> the power buffer is numbered from 1 to 6.
>
> I am pretty sure that number 1 would be 1000 rpm and number 6 would be
> 3000 rpm. the rubbing compound and the polishing compounds require
> specific rpm settings.............sooooooooo.........
>
> my question is what rpm settings would I get from numbers 2 thru 5?
>
> and don't tell me that I my Harbor Fraud power buffer is the
> problem........:)
>
> Brad

Mine goes up to 11.

[Bob Kuykendall]

On Sep 14, 3:34*pm, Dave Nadler > wrote:

> Mine goes up to 11.

Police said it was one of those cases best left unsolved!