Glareshield renewal and TSA

[Roger Long]

I stopped by the shop yesterday for what I thought would be a quick check on
the progress of the annual. The fellow had stopped working on the windshield
replacement and moved on to other things in hopes I would stop by and
discuss the appalling appearance of our glareshield.

I had to agree that it would be criminal to put a new windshield over that
crummy stuff which would be difficult or impossible to replace later. There
was no way to get board approval for another day's work on such short notice
so, I zipped out to buy materials and, seven hours later, it was done.

Check this out:

http://baldeagleflyingclub.org/Glareshield.htm

The foam edge piece had torn its screw holes and was hanging loose for a
good portion in front of the pilot. I glued in an aluminum strip and then
reglued the plastic edge over it. The screws now go through the aluminum so
the foam is anchored by a generous surface of glue joint. The aluminum isn't
visible at all.

I see on AOPA's site that the TSA has now turned its attention to repair
stations. Will I be able to do something like this next year? I seriously
doubt it.

--
Roger Long

[Margy Natalie]

Nice work!!!

Margy

Roger Long wrote:

> ........

> There
> was no way to get board approval for another day's work on such short notice
> so, I zipped out to buy materials and, seven hours later, it was done.
>
> Check this out:
>
> http://baldeagleflyingclub.org/Glareshield.htm
>

[Al Gilson]

> .......so, I zipped out to buy materials and, seven hours later, it was done.
>
Can you elaborate? What are the materials? How did you size it? Attach
it? Can it be done with the windshield in place?

Questions, questions, questions.

- - -
Al Gilson
1964 Skyhawk

--
Al Gilson
Spokane, WA USA
1970 VW Convertible
1964 Cessna Skyhawk

[Roger Long]

The reason I dropped everything and did it right then is that I wouldn't
even want to think about doing it with the windshield in. People have done
it with screwdrivers and knives bent at an angle and I imagine enough
cussing to build half an airplane. The windshield actually lands on the
edge of the vinyl overlay. Getting that edge right would be very hard. I
just started an oversize piece of Naugahyde in the middle and worked out.
Then I trimmed it with a razorblade. 3M makes a special spray contact
cement especially for gluing Naugahyde to metal in places where it will be
exposed to sun and heat.

If I had to do this with the windshield in, I would go with one of the
fiberglass units that slide in over the whole thing and have
electroluminecent lighting as well. That will cost you about$500 by the
time it's in. This job was done for under 20 bucks plus the 7 hours of my
time.

BTW the first windshield is the expensive one because all the rivets have to
be drilled out. The trim strip will be put back with screws so the next
replacement will be much cheaper. If you have a 64 plane, just tell your
A&P to take a critical look at the windshield. Then you can tell your wife,
"The IA made me do it." The view and safety will be worth it.

--
Roger Long
Al Gilson > wrote in message
...
>
> > .......so, I zipped out to buy materials and, seven hours later, it was
done.
> >
> Can you elaborate? What are the materials? How did you size it? Attach
> it? Can it be done with the windshield in place?
>
> Questions, questions, questions.
>
> - - -
> Al Gilson
> 1964 Skyhawk
>
> --
> Al Gilson
> Spokane, WA USA
> 1970 VW Convertible
> 1964 Cessna Skyhawk

[Jay Honeck]

> Check this out:

Beautiful, Roger.

Can you come do mine when I need a new windshield?

:-)
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"

[Stu Gotts]

On Thu, 26 Feb 2004 11:33:00 GMT, "Roger Long"
m> wrote:

I
>just started an oversize piece of Naugahyde in the middle and worked out.
>Then I trimmed it with a razorblade. 3M makes a special spray contact
>cement especially for gluing Naugahyde to metal in places where it will be
>exposed to sun and heat.
>
Isn't the Naugahyde a product of the North American Nauga? Since
there beasts have been on the endangered species list for many years,
don't you feel any shame? Our neighbors in Canada will certainly be
disappointed in you.

[BTIZ]

> Isn't the Naugahyde a product of the North American Nauga? Since
> there beasts have been on the endangered species list for many years,
> don't you feel any shame? Our neighbors in Canada will certainly be
> disappointed in you.

We sacrificed a Nauga last summer to repair the seat on the airport golf
cart.. it was a very nice albino Nauga. Being an albino, I don't think the
Canadians would have ever seen him, and if they never saw him, would they
ever miss him?
Don't think so..

[[email protected]]

Stu Gotts > wrote:


> Isn't the Naugahyde a product of the North American Nauga? Since
> there beasts have been on the endangered species list for many years,
> don't you feel any shame? Our neighbors in Canada will certainly be
> disappointed in you.

Crockpot nauga with potatoes, onions, carrots, a bit of bay leaf and a
goodly dollop of red wine.

Them's good eatin'.

--
Jim Pennino

Remove -spam-sux to reply.

[Michael 182]

It must be nice to have skill and talent. Nice job.

Michael

"Roger Long" m> wrote in
message ...
> I stopped by the shop yesterday for what I thought would be a quick check
on
> the progress of the annual. The fellow had stopped working on the
windshield
> replacement and moved on to other things in hopes I would stop by and
> discuss the appalling appearance of our glareshield.
>
> I had to agree that it would be criminal to put a new windshield over that
> crummy stuff which would be difficult or impossible to replace later.
There
> was no way to get board approval for another day's work on such short
notice
> so, I zipped out to buy materials and, seven hours later, it was done.
>
> Check this out:
>
> http://baldeagleflyingclub.org/Glareshield.htm
>
> The foam edge piece had torn its screw holes and was hanging loose for a
> good portion in front of the pilot. I glued in an aluminum strip and then
> reglued the plastic edge over it. The screws now go through the aluminum
so
> the foam is anchored by a generous surface of glue joint. The aluminum
isn't
> visible at all.
>
> I see on AOPA's site that the TSA has now turned its attention to repair
> stations. Will I be able to do something like this next year? I seriously
> doubt it.
>
> --
> Roger Long
>
>

[Dennis O'Connor]

Well, there is the Caribbean Nauga, a sub species that is not endangered,
but they don't make good upholstery... They hang around the resorts and
dance for the tourists, who give them drinks and cigarettes... The
combination of sun, cigarettes, and alcohol makes their hide get wrinkles
while they are still too young for upholstery... Not attractive at all...

denny

"Stu Gotts" > wrote in > Isn't the Naugahyde a product
of the North American Nauga? .