Piper 6.00x6 Nose wheel and fork?

[mikem]

I need some help with Piper part numbers. I'm looking for the
Piper Part numbers of the 6.00x6 nose wheel fork used on the
"heavier" Cherokees, Comanchees, etc.

Jay Honeck and Don Tuite sent reprints of the PA28 manual pages which
show only the 5.00x5 wheel and hardware. Thanks guys.

I have seen Tripacers, Cherokees, Cherokee Sixes, and Comanchees on the
ramp which have a 6.00x6 nose wheel. I would like to get a photo copy of
the parts manual page on any of these aircraft which shows both the
illustration, and the part numbers of the Fork, the wheel axle, spacers,
buckets, and fasteners used on the fork itself.

Does anyone know if Piper supplied the 6.00x6 nose wheel as an option
for PA28s?

Thanks in advance,

Mike Mladejovsky
Skylane '1MM
Pacer '00Z

mgm17160 AT utah.edu

[Jay Masino]

mikem > wrote:

I sent some images to your e-mail account. The 6.00x6 configuration was
FAR more common, so I'm not sure of the problem.

--- Jay



--

__!__
Jay and Teresa Masino ___(_)___
http://www2.ari.net/jmasino ! ! !
http://www.oceancityairport.com
http://www.oc-adolfos.com

[Jay Honeck]

> Jay Honeck and Don Tuite sent reprints of the PA28 manual pages which
> show only the 5.00x5 wheel and hardware. Thanks guys.

Sorry, Mike. Those sheets were from the Warrior parts manual -- I don't
have one specifically for the Pathfinder.
--
Jay Honeck
Iowa City, IA
Pathfinder N56993
www.AlexisParkInn.com
"Your Aviation Destination"