Spare Transponder Antenna?

[Jim Weir]

I'm starting my Oshkosh forum writing and I need to know if anybody has a spare
commercial transponder antenna -- the kind with a BNC connector on one end and a
little chrome BB on the other end, mounts in a single hole. I had three or four
of them and have given them away over the years to folks that needed one.

Beg, borrow, steal, or buy. Your choice. Happy to reciprocate some day when
YOU need something. I'll be happy to send a SASbox if that is your preference.

Jim


Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com

[Jim Weir]

Darrel...

I appreciate the offer, but the fin type will not demonstrate what I'm trying to
get across. Thanks again.

Jim


Darrel Toepfer >
shared these priceless pearls of wisdom:


->
->I have a spare fin type... But I'll want it back at some point, unless
->you want the spare transponder too... ;-)
Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com

[Bob Olds]

Jim Weir > wrote in message >...
> Darrel...
>
> I appreciate the offer, but the fin type will not demonstrate what I'm trying to
> get across. Thanks again.
>
> Jim
>
>
> Darrel Toepfer >
> shared these priceless pearls of wisdom:
>
>
> ->
> ->I have a spare fin type... But I'll want it back at some point, unless
> ->you want the spare transponder too... ;-)
> Jim Weir (A&P/IA, CFI, & other good alphabet soup)
> VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
> http://www.rst-engr.com




************************************************** *****************************

Jim:
I just emailed you that I have the antenna you need.
Just email me your adderss to mail to mail it to.
Hey: I built one of your 360 nav/comms for our first RV-4 back in the
early 1980's. It was a fun project.

Bob Olds
Charleston,Arkansas

[Jim Weir]

And I emailed you back my package addy. Thank you, thank you, thank you. And,
for all of you who are going to my forum at Oshkosh this year, you have Bob to
thank for the transponder part of it.

Jim

(Did I say thank you?)



(Bob Olds)
shared these priceless pearls of wisdom:

->************************************************** *****************************
->
->Jim:
->I just emailed you that I have the antenna you need.
->Just email me your adderss to mail to mail it to.
->Hey: I built one of your 360 nav/comms for our first RV-4 back in the
->early 1980's. It was a fun project.
->
->Bob Olds
->Charleston,Arkansas

Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com

[Javier Henderson]

Jim Weir > writes:

> I'm starting my Oshkosh forum writing and I need to know if anybody has a spare
> commercial transponder antenna -- the kind with a BNC connector on one end and a
> little chrome BB on the other end, mounts in a single hole. I had three or four
> of them and have given them away over the years to folks that needed one.
>
> Beg, borrow, steal, or buy. Your choice. Happy to reciprocate some day when
> YOU need something. I'll be happy to send a SASbox if that is your preference.

Got one you can have next month when you stop by my hangar. I'll even
clean it up some :)

It came off to make room for the 70cm ham radio antenna... (it was originally
used for a DME that was in the plane, which was removed before I bought it).

-jav

[Jim Weir]

Thanks anyway, Jav. I guess you didn't see yesterday afternoon's post where one
is already on its way from Arkansas. Besides, I really need it before the EAA
Golden West gig the week before our project.

But thanks for the thought.

Jim



Javier Henderson >
shared these priceless pearls of wisdom:

->
->Got one you can have next month when you stop by my hangar. I'll even
->clean it up some :)
Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com