KX155 Glideslope Interface

[Don Tuite]

There are two versions of the KX155. One will drive a KI204 or 209;
one won't.

Anybody know if it is possible to buy the interface and have it
installed in a non-GS KX155 so that the radio is legal?

Don

[Mike Granby]

Yep. It's an expansion board that mounts in the radio. It's not voltage
specific, as it gets its power from the main board so doesn't care if
it's in a 14V or 28V unit. You see them on eBay occasionally, but they
are not too common.

[Aaron Coolidge]

Mike Granby > wrote:

: Yep. It's an expansion board that mounts in the radio. It's not voltage
: specific, as it gets its power from the main board so doesn't care if
: it's in a 14V or 28V unit. You see them on eBay occasionally, but they
: are not too common.

And they seem to go for upwards of $500. It's probably cheaper to buy
a KX-155 with a GS board in it, and unload the old one on e-bay. Easier, too.
--
Aaron C.

[Don Tuite]

On Thu, 13 Jan 2005 05:15:52 +0000 (UTC), Aaron Coolidge
> wrote:

>Mike Granby > wrote:
>
>: Yep. It's an expansion board that mounts in the radio. It's not voltage
>: specific, as it gets its power from the main board so doesn't care if
>: it's in a 14V or 28V unit. You see them on eBay occasionally, but they
>: are not too common.
>
>And they seem to go for upwards of $500. It's probably cheaper to buy
>a KX-155 with a GS board in it, and unload the old one on e-bay. Easier, too.

OK. Thanks.

Don