NSD360A Pinouts

[Michelle P]

Hi all,
I am looking for the pinouts for the NSD360A. I pulled mine and am
replacing it with a much better one. Instead of tracing the wires back
to the source units I was hoping to just transfer the wire from the old
connector the new one. I am having trouble finding the pinouts for the
360. Google was little help. Actually it had no hits!.

Thanks,
Michelle

[Steve]

> Hi all,
> I am looking for the pinouts for the NSD360A. I pulled mine and am
> replacing it with a much better one. Instead of tracing the wires back
> to the source units I was hoping to just transfer the wire from the old
> connector the new one. I am having trouble finding the pinouts for the
> 360. Google was little help. Actually it had no hits!.
>
> Thanks,
> Michelle
>

You can find some drawings that should be helpful at www.centuryflight.com.
There are autopilot wiring diagrams that include the NSD-360A.

[[email protected]]

On Thu, 27 Jan 2005 15:29:48 GMT, Michelle P
> wrote:

>I am looking for the pinouts for the NSD360A. I pulled mine and am
>replacing it with a much better one. Instead of tracing the wires back
>to the source units I was hoping to just transfer the wire from the old
>connector the new one. I am having trouble finding the pinouts for the
>360. Google was little help. Actually it had no hits!.

Try here.

http://www.centuryflight.com/services/frame/services.htm

[Michelle P]

Well, duh..... I looked on the Century Website last night and could not
find these. Found exactly what I needed. Thanks for the help.....
Michelle

Michelle P wrote:

> Hi all,
> I am looking for the pinouts for the NSD360A. I pulled mine and am
> replacing it with a much better one. Instead of tracing the wires back
> to the source units I was hoping to just transfer the wire from the
> old connector the new one. I am having trouble finding the pinouts for
> the 360. Google was little help. Actually it had no hits!.
>
> Thanks,
> Michelle
>

[entenvater]

Hi Michelle,
Do you have a copy of the pinout still?
ThanksWell, duh..... I looked on the Century Website last night and could not
find these. Found exactly what I needed. Thanks for the help.....
Michelle

Michelle P wrote:

Hi all,
I am looking for the pinouts for the NSD360A. I pulled mine and am
replacing it with a much better one. Instead of tracing the wires back
to the source units I was hoping to just transfer the wire from the
old connector the new one. I am having trouble finding the pinouts for
the 360. Google was little help. Actually it had no hits!.

Thanks,
Michelle