LX166 - Colibri

[[email protected]]

All hi,
I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?
I would be very very grateful.
Regards Arijus

[johnorto at gamil.com]

On Thursday, 15 August 2013 18:03:13 UTC+8, Arijus Augustas wrote:
> All hi,
>
> I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?
>
> I would be very very grateful.
>
> Regards Arijus

Try the LX166 manual at https://static.squarespace.com/static/50c5b022e4b0e98ba8ac9b99/t/50d8a607e4b0a05702a0fc12/1356375559828/LX166Man-eng.1.pdf

on page 27

[Arijus Augustas]

On Thursday, August 15, 2013 1:03:13 PM UTC+3, Arijus Augustas wrote:
> All hi,
>
> I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?
>
> I would be very very grateful.
>
> Regards Arijus

I have this manual but there is not marked on the connector 12v
PINOUT:
1. GND (ground)
2. NMEA UOT
3. NMEA IN
4. ?
5. ?
6. ?
where 12V

[johnorto at gamil.com]

12V will be on pin 6.

On Thursday, 15 August 2013 20:05:17 UTC+8, Arijus Augustas wrote:
> On Thursday, August 15, 2013 1:03:13 PM UTC+3, Arijus Augustas wrote:
>
> > All hi,
>
> >
>
> > I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?
>
> >
>
> > I would be very very grateful.
>
> >
>
> > Regards Arijus
>
>
>
> I have this manual but there is not marked on the connector 12v
>
> PINOUT:
>
> 1. GND (ground)
>
> 2. NMEA UOT
>
> 3. NMEA IN
>
> 4. ?
>
> 5. ?
>
> 6. ?
>
> where 12V