A aviation & planes forum. AviationBanter

If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Go Back   Home » AviationBanter forum » rec.aviation newsgroups » Soaring
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

LX166 - Colibri



 
 
Thread Tools Display Modes
  #1  
Old August 15th 13, 11:03 AM posted to rec.aviation.soaring
[email protected]
external usenet poster
 
Posts: 1
Default LX166 - Colibri

All hi,
I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?
I would be very very grateful.
Regards Arijus
  #2  
Old August 15th 13, 12:39 PM posted to rec.aviation.soaring
johnorto at gamil.com
external usenet poster
 
Posts: 2
Default LX166 - Colibri

On Thursday, 15 August 2013 18:03:13 UTC+8, Arijus Augustas wrote:
All hi,

I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?

I would be very very grateful.

Regards Arijus


Try the LX166 manual at https://static.squarespace.com/stati...6Man-eng.1.pdf

on page 27
  #3  
Old August 15th 13, 01:05 PM posted to rec.aviation.soaring
Arijus Augustas
external usenet poster
 
Posts: 1
Default LX166 - Colibri

On Thursday, August 15, 2013 1:03:13 PM UTC+3, Arijus Augustas wrote:
All hi,

I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?

I would be very very grateful.

Regards Arijus


I have this manual but there is not marked on the connector 12v
PINOUT:
1. GND (ground)
2. NMEA UOT
3. NMEA IN
4. ?
5. ?
6. ?
where 12V
  #4  
Old August 15th 13, 01:10 PM posted to rec.aviation.soaring
johnorto at gamil.com
external usenet poster
 
Posts: 2
Default LX166 - Colibri

12V will be on pin 6.

On Thursday, 15 August 2013 20:05:17 UTC+8, Arijus Augustas wrote:
On Thursday, August 15, 2013 1:03:13 PM UTC+3, Arijus Augustas wrote:

All hi,




I have LX166 and Colibri v4.0 logger, but do not have cable to connect these devices (LX navigation this cable Order Code:LX16C), maybe someone have this cable pinout?




I would be very very grateful.




Regards Arijus




I have this manual but there is not marked on the connector 12v

PINOUT:

1. GND (ground)

2. NMEA UOT

3. NMEA IN

4. ?

5. ?

6. ?

where 12V


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Distinguishing an LX Navigation Colibri 1 from a Colibri 4? Papa3[_2_] Soaring 0 October 25th 12 02:49 AM
Colibri II Rick[_3_] Soaring 5 May 5th 12 12:33 PM
colibri ryanglover1969 Soaring 2 August 17th 09 12:44 AM
Colibri Fred Blair Soaring 2 August 25th 08 03:24 PM
FS Colibri [email protected] Soaring 0 March 1st 06 12:26 PM


All times are GMT +1. The time now is 03:26 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 AviationBanter.
The comments are property of their posters.