DISCUS 2 a WT & BALANCE

[[email protected]]

HI
My Discus 2a manual says the ARM for Pilot & Parachute is ( -17.72 in.)
The A&P who did the WT & Balance 10 years ago used ( -15.20 in.) for the ARM.
Did he make a mistake? It's a big difference.
If you have a D2a can your check your WT & BAL for me.
If I could get a copy of your W&B that would be great.
Thanks
Glen

[[email protected]]

On Thursday, February 19, 2015 at 8:06:18 PM UTC-5, wrote:
> HI
> My Discus 2a manual says the ARM for Pilot & Parachute is ( -17.72 in.)
> The A&P who did the WT & Balance 10 years ago used ( -15.20 in.) for the ARM.
> Did he make a mistake? It's a big difference.
> If you have a D2a can your check your WT & BAL for me.
> If I could get a copy of your W&B that would be great.
> Thanks
> Glen

See if the manual specifies different arms for light and heavy pilots.
UH

[[email protected]]

On Thursday, February 19, 2015 at 8:06:18 PM UTC-5, wrote:
> HI
> My Discus 2a manual says the ARM for Pilot & Parachute is ( -17.72 in.)
> The A&P who did the WT & Balance 10 years ago used ( -15.20 in.) for the ARM.
> Did he make a mistake? It's a big difference.
> If you have a D2a can your check your WT & BAL for me.
> If I could get a copy of your W&B that would be great.
> Thanks
> Glen

I don't see that, just a different Arm for a B model.

[JJ Sinclair[_2_]]

CG will vary with seat back position and thickness of parachute. Pilot CG is approximately your belly button. Climb in with chute on and measure the horizontal distance from the wing leading edge to your belly button (use a pumb-bob, then mark edge of canopy rail). If memory serves me, Discus performs best at 92% of allowable range..
:>) JJ

[[email protected]]

Glen,
Getting ready for the Seniors... huh... I will check my information this evening when I get home. I will e-mail you. Have fun. It's -10 in upstate NY once again.

Tim Hanke
Discus 2a "H1"


On Thursday, February 19, 2015 at 8:06:18 PM UTC-5, wrote:
> HI
> My Discus 2a manual says the ARM for Pilot & Parachute is ( -17.72 in.)
> The A&P who did the WT & Balance 10 years ago used ( -15.20 in.) for the ARM.
> Did he make a mistake? It's a big difference.
> If you have a D2a can your check your WT & BAL for me.
> If I could get a copy of your W&B that would be great.
> Thanks
> Glen

[Matt Herron Jr.]

On Thursday, February 19, 2015 at 5:06:18 PM UTC-8, wrote:
> HI
> My Discus 2a manual says the ARM for Pilot & Parachute is ( -17.72 in.)
> The A&P who did the WT & Balance 10 years ago used ( -15.20 in.) for the ARM.
> Did he make a mistake? It's a big difference.
> If you have a D2a can your check your WT & BAL for me.
> If I could get a copy of your W&B that would be great.
> Thanks
> Glen

you can back calculate your actual pilot/chute arm if the W&B includes the empty weight as well. SeeG makes this and other calculations for W&B very easy (shameless plug). Visit www.glideplan.com for more info.

Matt