Piper PA25 Tost tow release conversion

[[email protected]]

We have run into an issue with the rear most anchoring bolts. The Tost kit as supplied uses AN6 bolts. The existing mounting holes are AN4. Any recommendations?

Thanks,
Dan
765 744 4132

[Tony[_5_]]

3/8" drill bit?

[Ken Fixter[_2_]]

At 19:56 19 March 2018, Tony wrote:
>3/8" drill bit?
>

> No I think better to sleev tost down to AN4, or contact tost with > with
the problem.
> KF

[Bob Kuykendall]

Sawzall all the things!!!!!

[Tango Eight]

On Monday, March 19, 2018 at 6:34:24 PM UTC-4, Bob Kuykendall wrote:
> Sawzall all the things!!!!!

You could be the next youtube sensation....

[kirk.stant]

On Monday, March 19, 2018 at 1:13:33 PM UTC-5, wrote:
> We have run into an issue with the rear most anchoring bolts. The Tost kit as supplied uses AN6 bolts. The existing mounting holes are AN4. Any recommendations?
>
> Thanks,
> Dan
> 765 744 4132

Daniel, we just finishes installing a Tost CRG winch system in our Pawnee and may be able to help. PM me and lets figure this out.

We (SLSA) have Tost winches in both our Pawnees and love them.

Kirk

kirk dot stant at gmail dot com

[[email protected]]

On Monday, March 19, 2018 at 2:13:33 PM UTC-4, wrote:
> We have run into an issue with the rear most anchoring bolts. The Tost kit as supplied uses AN6 bolts. The existing mounting holes are AN4. Any recommendations?
>
> Thanks,
> Dan
> 765 744 4132

Sleeve it down, do not drill!