Continental accessory case

[pwm]

Does anyone know if a Continental O-200 or a C-75 rear accessory case will
fit an A-65? Reason for asking is that I'm wanting to add a starter and a
generator.

Thanks,
Monty

[pwm]

Can you elaborate as to the modifications necessary to make a -12 acc case
work on a A-65 crankcase?

Thanks,
Monty

"Cy Galley" > wrote in message
news:8muze.144887$xm3.82381@attbi_s21...
> Not as they come from the factory. But anything is possible with a
> talented machinist but the FAA will NOT approve without a 337.
>
>
> "pwm" > wrote in message
> ...
>> Does anyone know if a Continental O-200 or a C-75 rear accessory case
>> will fit an A-65? Reason for asking is that I'm wanting to add a starter
>> and a generator.
>>
>> Thanks,
>> Monty
>>
>>
>
>

[Morgans]

"Cy Galley" > wrote in message
news:8muze.144887$xm3.82381@attbi_s21...
> Not as they come from the factory. But anything is possible with a
talented
> machinist but the FAA will NOT approve without a 337.

Cy, you gotta think outside the box! Here in the world of homebuilts, there
are no 337s!
--
Jim in NC

[Cy Galley]

Have to change a bunch of gears. but the crank is has the same bearings.
I've been told one can put an O-200 crank in an A-65 AND the cylinders as
well.

There is a company that has an STC to put a -12 accessory case on a -8 C-85
so I'll be it can be done on the A-65. All it takes is money and a good
machinist.

The real problem is it adds weight and after being done ;the 2 place plane
becomes a single.
--
Cy Galley - Aeronca Aviators Club
Newsletter Editor & EAA TC
www.aeronca.org
Actively supporting Aeroncas every day
"pwm" > wrote in message
...
> Can you elaborate as to the modifications necessary to make a -12 acc case
> work on a A-65 crankcase?
>
> Thanks,
> Monty
>
> "Cy Galley" > wrote in message
> news:8muze.144887$xm3.82381@attbi_s21...
>> Not as they come from the factory. But anything is possible with a
>> talented machinist but the FAA will NOT approve without a 337.
>>
>>
>> "pwm" > wrote in message
>> ...
>>> Does anyone know if a Continental O-200 or a C-75 rear accessory case
>>> will fit an A-65? Reason for asking is that I'm wanting to add a starter
>>> and a generator.
>>>
>>> Thanks,
>>> Monty
>>>
>>>
>>
>>
>
>