F16 for sale

[Doug]

Check out:
http://cgi.ebay.com/ebaymotors/F16-A-MODEL-CURRENTLY-FLYING_W0QQcmdZViewItemQQcategoryZ26428QQitemZ4576 194631QQrdZ1

I've always wanted one. Do you think it would fit in my hangar?

[Dan Luke]

Wonder what a typical annual would cost.

[David Lesher]

"Dan Luke" > writes:

>Wonder what a typical annual would cost.


"Daily" not annual... What is it...20 hours of maint for every hour
of flight?

--
A host is a host from coast to
& no one will talk to a host that's close........[v].(301) 56-LINUX
Unless the host (that isn't close).........................pob 1433
is busy, hung or dead....................................20915-1433

[Mike W.]

I read somewhere it costs $50,000 to prep a fighter jet for flight.

"David Lesher" > wrote in message
...

> "Daily" not annual... What is it...20 hours of maint for every hour
> of flight?

[kristoffer-m20j]

I read somewhere it costs $50,000 to prep a fighter jet for flight.

"David Lesher" wrote in message
...

"Daily" not annual... What is it...20 hours of maint for every hour
of flight?

Just remember those price are @ Goverment Rates which translates in to what 30:1 or 50:1 :-)

[Jimmy B.]

Doug wrote:
> Check out:
> http://cgi.ebay.com/ebaymotors/F16-A-MODEL-CURRENTLY-FLYING_W0QQcmdZViewItemQQcategoryZ26428QQitemZ4576 194631QQrdZ1
>
> I've always wanted one. Do you think it would fit in my hangar?
>
If you have $14M, then you're my best friend! :-)

[John Kunkel]

"Doug" > wrote in message
oups.com...
> Check out:
> http://cgi.ebay.com/ebaymotors/F16-A-MODEL-CURRENTLY-FLYING_W0QQcmdZViewItemQQcategoryZ26428QQitemZ4576 194631QQrdZ1
>
> I've always wanted one. Do you think it would fit in my hangar?
>

I wonder what the chances are of getting it licensed.

[Andre]

A few years ago I was looking at buying a Mig 15 or 21. There was a site on
the net that advertised them for sale for 20 - 50K depending on the model.
The also had a price/hour spreadsheet. For the Mig 15 the cost was about 1K
per hour and the 21 was about 1.5K per hour.

You could give me one and I still could not afford it.


"John Kunkel" > wrote in message
...
>
> "Doug" > wrote in message
> oups.com...
> > Check out:
> >
http://cgi.ebay.com/ebaymotors/F16-A-MODEL-CURRENTLY-FLYING_W0QQcmdZViewItemQQcategoryZ26428QQitemZ4576 194631QQrdZ1
> >
> > I've always wanted one. Do you think it would fit in my hangar?
> >
>
> I wonder what the chances are of getting it licensed.
>
>