GTX 327 serial input?

[weebee]

Help - anybody out there experienced using the serial (not gray code)
encoder inputs on a Garmin GTX 327? My manual (revision J) shows the
first "RS-232 in" connection on Pin 19, in most places in the manual.
But on on the encoder hook up chart (chart 2.6.2.1, page 15) it shows
Pin 19 to be the SECOND RS-232 and pin 2 to be the first. Which info
is correct?

I'm gonna have enough trouble with those gosh darned pin connections as
it is. Anybody with experience who can save me doing it twice -
particulary since I'm trying to do this over the weekend - I owe you an
airport coffee.

Mike

[Mike Rapoport]

They are both correct. The 327 has multiple RS232 channels. I don't
remenber which one I used. Just go slow...those pins are a lot easier to
put in than to extract.

Mike
MU-2


"weebee" > wrote in message
ups.com...
> Help - anybody out there experienced using the serial (not gray code)
> encoder inputs on a Garmin GTX 327? My manual (revision J) shows the
> first "RS-232 in" connection on Pin 19, in most places in the manual.
> But on on the encoder hook up chart (chart 2.6.2.1, page 15) it shows
> Pin 19 to be the SECOND RS-232 and pin 2 to be the first. Which info
> is correct?
>
> I'm gonna have enough trouble with those gosh darned pin connections as
> it is. Anybody with experience who can save me doing it twice -
> particulary since I'm trying to do this over the weekend - I owe you an
> airport coffee.
>
> Mike
>