Ventus Panel upgrade

[Fish]

Hi,
Can anyone tell me if a Ventus 2C panel will fit in a Ventus C tilt
panel installation with little or no modification?
Also, if someone has a DXF, CAD, DWG file whatever, of either of these
I'd be very greatful for a copy.
Cheers
Fish

[Mottley]

Fish wrote:
> Hi,
> Can anyone tell me if a Ventus 2C panel will fit in a Ventus C tilt
> panel installation with little or no modification?
> Also, if someone has a DXF, CAD, DWG file whatever, of either of these
> I'd be very greatful for a copy.
> Cheers
> Fish

on www.mandhsoaring.com you can see some suggested panel layouts for
each SH Glider.

[Robert Backer]

These two panels are different. The Ventus b/c panel is flat and mounts
with 3 bolts, two on top and one near the center. The V2 panel is not
flat and mounts with 4 bolts. Whether modification is possible I can't
answer, but I doubt it would be worth the effort.

Bob

Mottley wrote:
> Fish wrote:
>> Hi,
>> Can anyone tell me if a Ventus 2C panel will fit in a Ventus C tilt
>> panel installation with little or no modification?
>> Also, if someone has a DXF, CAD, DWG file whatever, of either of these
>> I'd be very greatful for a copy.
>> Cheers
>> Fish
>
> on www.mandhsoaring.com you can see some suggested panel layouts for
> each SH Glider.
>

[Fish]

Thanks Bob. You've talked me out of it.

Cheers
Fish
Robert Backer wrote:
> These two panels are different. The Ventus b/c panel is flat and mounts
> with 3 bolts, two on top and one near the center. The V2 panel is not
> flat and mounts with 4 bolts. Whether modification is possible I can't
> answer, but I doubt it would be worth the effort.
>
> Bob
>
> Mottley wrote:
> > Fish wrote:
> >> Hi,
> >> Can anyone tell me if a Ventus 2C panel will fit in a Ventus C tilt
> >> panel installation with little or no modification?
> >> Also, if someone has a DXF, CAD, DWG file whatever, of either of these
> >> I'd be very greatful for a copy.
> >> Cheers
> >> Fish
> >
> > on www.mandhsoaring.com you can see some suggested panel layouts for
> > each SH Glider.
> >