Century Ic Pinout

[Grandmaster]

Hi, Does anyone have a graphical representation of the Century Ic
wiring harness? The Century web site schematic displays the pinouts in
a single line, but the connector has parallel rows. My (18 pin)
connector shows that the pins run in a circle as opposed to 1-9 then
starting back at the parallel pin adjacent to #1 as #10. Anyone have
any ideas? I need to fond #13 and #14 (radio left and right).

Thanks,
Edward

[Grandmaster]

Actually, I figured it out...I am confident that I have it connected
correctly, but it does not track. The Century I acts like it is not
getting any radio right/left signal at all. I am geting a voltage
spike at the connector on the correct leads, but the autopilot just
doesn't seem interested in tracking. Any ideas how to troubleshoot the
tracking?


Grandmaster wrote:
> Hi, Does anyone have a graphical representation of the Century Ic
> wiring harness? The Century web site schematic displays the pinouts in
> a single line, but the connector has parallel rows. My (18 pin)
> connector shows that the pins run in a circle as opposed to 1-9 then
> starting back at the parallel pin adjacent to #1 as #10. Anyone have
> any ideas? I need to fond #13 and #14 (radio left and right).
>
> Thanks,
> Edward