|
|
USB-logger koppeling by
Gerbert
I have a iPAQ 1915 with a normal USB-synchronisationcable. Is it
possible to connect my Colibri-logger to GlideNav or gpslog or any
kind of PDA-program with this cable or do i need a serial cable to get
this done? (And wich will be the problem? Making the cable or is it a
software...
|
|
0 |
1,309 |
|
|
USB-logger koppeling by
Gerbert
I have a iPAQ 1915 with a normal USB-synchronisationcable. Is it
possible to connect my Colibri-logger to GlideNav or gpslog or any
kind of PDA-program with this cable or do i need a serial cable to get
this done? (And wich will be the problem? Making the cable or is it a
software...
|
|
0 |
1,436 |
|
|
Ka6e vs Foka4 by
Janos Bauer
Is there anyone who has experience with both of these sailplanes? They
seems at the same price range but I don't know what would be the
difference during xc flights. What about the maintenance, handling and
any other issues?
Thanks for your advice!
/Janos
( 1 2)
|
|
19 |
3,122 |
|
|
Survey participants wanted (App0721) by
F.L. Whiteley
Try a http://groups.google.com search on the name Gerome Corvus, listed as
contact on psychrsrch.net. Interesting reading if nothing else.
Check out the disclaimer in the message header also.
"Ziggy" wrote in message
...
...
|
|
0 |
1,595 |
|
|
Part 2-Pilot walked from this!! by
Al
Heres the full narative to save everyone the taks of hunting this down from
the borken link
Al
LAX03CA201
On June 15, 2003, about 1500 Pacific daylight time, an unpowered Schleicher
ASW-20 glider, N34LB, impacted trees after a loss of thermal lift near
Idyllwild, California. The pilot/owner was...
|
|
7 |
1,744 |
|
|
LX20 Firmware Problem by
Bruce Greeff
I have a LX20 that was running very old firmware. The factory very
helpfully provided me with the firmware upgrade to V5.21.
Installed the firmware and everything appears to be working 100%. Of
course I can't pick up the satelites inside the concrete building I work
in so we will see how it works...
|
|
3 |
2,005 |
|
|
US Team 7/18 and 7/19 reports from Nitra by
F.L. Whiteley
Conrad Suechting, US Team Captain, completes his final reports from Nitra
7/18, Rain :^( and Parties;^)
7/19 Closing Ceremonies
http://www.ssa.org/UsTeam/ust_reports_sr.htm
|
|
2 |
2,223 |
|
|
fire at Schleicher factory facilities by
Eric van Geetsum
Look at http://www.osthessen-news.de/OsthessenNews/news/news030719_8.htm
Newspaper of Ost-Hessen.......
Photo's included of the Disaster at the Schleicher facilities
Fire department did a good job. (imho)
In case the link does not work:
http://www.osthessen-news.de
== Samstag - 19. Juli...
|
|
7 |
2,457 |
|
|
Soaring in Canada? by
Steve B
I will be traveling to the Vancouver area. I am looking for locations
in the area that offer sailplane rental services. I am curious if
anybody can recommend a soaring site for the area.
Thanks
Steve
|
|
1 |
1,876 |
|
|
Retrofit tailtank-VentusB? by
Stewart Kissel
My B has a addon tank which holds 6 liters, it *appears* that it was ins=
talled by glassing it in the cavity low in the tail, and I have been told=
it is a stock Schemp tank, fills from a small orifice on top of the tail=
No cutting open of tail apparently. I have a friend who would like to=
do...
|
|
0 |
1,341 |
|
|
Marske Video change of address by
Marske Flying Wings
Try this address for the Marske Pioneer IId video: the previous one did not
work in Explorer.
http://www.continuo.com/marske/pioneer/marske/marske pioneer.htm
--
Marske Flying Wings
http://www.continuo.com/marske
|
July 23rd 03 07:10 PM
by Al
|
1 |
1,654 |
|
|
Marske Pioneer Video by
Marske Flying Wings
Somehow the address still is incorrect, try again.
http://www.continuo.com/marske/pioneer/marske/marske pioneer.htm
--
Marske Flying Wings
http://www.continuo.com/marske
|
|
0 |
1,716 |
|
|
Marske Pioneer In flight Video by
Marske Flying Wings
I have posted on our interent site a short clip of the Marske Pioneer IId in
flight.
http://www.continuo.com/marske/pioneer/marske/marske%20pioneer.htm
If this address is too long click on our site below then look under
Pioneer.... then the Marske Pioneer IId
--
Marske Flying...
|
|
0 |
2,212 |
|
|
Salto accident? by
Hank Nixon
(Bob Kuykendall) wrote in message ...
I see on the FAA accident/incident Web page that there was a fatal
accident reported for an H-101 Salto apparently registered to an
occasional r.a.s. poster. Does anybody have any...
|
|
0 |
1,613 |
|
|
ETAs in WGC by
Bob Kuykendall
Earlier, Wiktor Kozlik wrote:
It looks like two ETAs are going to fly
during WGC in Leszno... Was the open
class glider weight limit increased or
the ETA's weight reduced?
Good question.
I don't know the answer, but I did some digging to
|
|
1 |
1,658 |
|
|
Differences in Italian vs US soaring instruction? by
Michael
Can anyone who is familiar with soaring instruction in the US and
Italy comment on the differences? I ask because I have started
training a 'student' - actually an Italian licensed glider pilot - who
wants to add US glider ratings to his US commercial and CFI
certificates. His flying is generally...
( 1 2 3 ... Last Page)
|
|
31 |
4,493 |
|
|
Best Yarn Spinner in Soaring? by
Papa3
There have been some amazing stories posted over the last couple of years
(the "Overspray on the Yuppie Farm" being a recent favorite). Who are some
of the other great yarn spinners in soaring? I for one vote Tony Benson
(P4) of Aero Club Albatross in Blairstown, NJ. Witness:
Years ago I had...
|
|
2 |
1,584 |
|
|
Bicester Fly In by
Whitson Bush
How was Bicester's fly in? Has anyone any pictures or anything? I'm sure
there were great stories shared and a lot of memories retold. Anyone?
|
|
0 |
1,670 |
|
|
ASW27 vs LS8-18 by
CH
Hi Chris,
to compare a 15 versus a 18m ship, a flapped to a non flapped glider
is not so easy mate. You have to find out what kind of a flying you
like.
I have an ASW27 and there are several reasons, I for myself would
stay with flaps and to some AS specific features like
- the flaps in landing...
|
July 22nd 03 10:57 PM
by CH
|
0 |
2,050 |
|
|
Need clean 1-26E canopy frame by
Robert de León
Does anyone have--or know the whereabouts of--a clean, unbent 1-26E canopy?
We don't need the plexiglas sections, just the frame section with the hinges
working etc.
Please contact me back via my email: with what you have and a
price.
We will pay for crating and shipping.
|
|
0 |
2,028 |