http://www.pilotoutlook.com/pilot_training/parachute_rigger_menu

I'm working on a somewhat generic sailplane cockpit for Condor2, loosely based on the Antares advanced ergonomy. There is a great cross-section of it on their site (below), however I need the actual measurement of at least one component so I can accurately scale the drawing. For this, I've chosen...

https://www.facebook.com/CondorSim/ Condor2 is finally here/around the corner. The new site is up, the old forum imported to the new one, and the store is up (buy links not active yet but prices are there) http://www.condorsoaring.com/order/?cn-reloaded=1# http://www.condorsoaring.com/forums/...

airspeed is sold, thanks. I also have a factory refurbished (2009 I think) LX-4000.. a very popular older flight computer that I even heard was how Orville Wright kept up Glider No5 up for 9 minutes in 1911! I'll entertain offers if there's any takers... paul at eaglebrandproducts dot com...

Any interest in a nos 2-1/4 Winter ASI? manufactured 2006 7 FMS 423 57mm 0-160kt, 510deg 0 @ 6:00 Bonus! I wanted zero to be at 12:00 so bought a faceplate from Winter (not installed) at 12:00 with the serial number engraved on it so can be used in eitehr orientation.

As per the title, I'm looking for a Cleveland 40-78 rim set w/disc in new or good condition. I don't need the bearings/seals, but whatcha got? -Paul Hanson (510) 535-1946 paul at eaglebrandproducts dot com

I have the following NOS Cleveland parts for trade/sale: 40-19 (older 5x5.00) wheel & disc, $150 extra disc for 40-19 $50 30-9 caliper w/linings but no torque plate $100 ($250 for the Cleveland lot bundled...) ....and some assorted used instruments for sale/trade: Borgelt B-100 w/57mm dual...

Hi Gang, CCSC (the other CCSC, Central Ca Soaring Club, Avenal, Ca...) is hosting our 35th Annual Spring (fun) Contest as per our usual schedule, with practice day being the first Wednesday after Mothers Day and continuing until Sunday. This makes the dates 5-13-09 through 5-17-09. This year we...

Anyone here know the diameter of a Jantar Std3 axle? (or SZD-59 axle, or any other Polish ship that happens to use the same axle...) My ships' far away and I'm scheming right now, lacking numbers. The manuals etc speak not of it. Thx. -Paul

For a little gas on the fire...I'm curious. Besides the P-124 Aviator by Rigging Innovations: http://www.rigginginnovations.com/products/aviator.htm or having Softie put a ram air in one of their harnesses, what other square emergency rigs are out there as options and which do you 'squares'...

Hi All, An SSA 'Master' CFIG I know is perpetually hammering it into his students that to initiate a turn in a glider, the FIRST thing you do is feed in rudder. On his 1-5 list of making a turn in a glider, #1 is rudder (as it's own separate input). While this may be aerodynamically acceptable...

Hi All, I am trying to figure out who the manufacturer of the particular flush latch below, and after MUCH interwebbing have still turned up nothing. http://www.n523rv.com/fuselage/Cowl%20latch%20outside.jpg and http://www.n523rv.com/fuselage/Cowl%20latch%20inside.jpg It's not a Camloc (none I've...

Apparently it was quite a phenomenon for a little while... I want a Horsa Caravan dammit! (nose section of course) http://www.youtube.com/watch?v=tCkzxOcwg_Q http://archive.oxfordmail.net/2001/5/9/63207.html -Paul

I googled a bit but came up with nothing very useful as of yet. Does anyone know of a (preferably US...) supplier of Interglas fabrics? I only need a few yards of both 92125 and 92145, for which I can find no direct alternative equivalents for. Alternatively, if anyone has some of this stuff on...

Kinda cool... http://www.barnstormers.com/eFLYER/2008/033-eFLYER-FA01-Soaring.html -Paul

Can anyone point me to some good sources for computer modeled pressure distribution charts for sailplanes? (particularly fuselages) I have googled plenty with little results so I figured I would ask here. I found some in my OSTIV publications I have looked through, but I have most of the Technical...

Subject line says it fine, but I'm looking for someone in Newport Beach CA to assist me with a simple glider related affair I cannot effect from Oakland. PM/call me is so, and thanks in advance! -Paul paul at eaglebrandproducts dotttt commmmm (510) 535-1946

There usually seems to be someone that wants a deal on a B-40, and they rarely show up used. It's 57mm, almost new w/paperwork, and the guy wants 175GBP for it. Seems like a decent deal...go to http://adverts.gliderpilot.net/ and click the classifieds option. It will come up under the accessories...

There usually seems to be someone that wants a deal on a B-40, and they rarely show up used. It's 57mm, almost new w/paperwork, and the guy wants 175GBP for it. Seems like a decent deal to me... http://adverts.gliderpilot.net/?op=s3&id=975 -Paul

There usually seems to be someone that wants a deal on a B-40, and they rarely show up used. It's 57mm, almost new w/paperwork, and the guy wants 175GBP for it. Seems like a decent deal to me...http:// adverts.gliderpilot.net/?op=s3&id=975 -Paul