On Wednesday, February 4, 2015 at 7:45:06 PM UTC-5, Doug Mueller wrote:
Hello all, I have a dittel FSG-60M Radio in my glider. It has a mic plug
with a telex IR Electric headset. The headset is inconvenient and I got a
Dynamic Mic from Wings and wheels. The glider was hard wired with a
PTT and a separate speaker. I have removed the plug on the end of the
mic and I wish to hard wire the mic. A brown,white wire with a ground
are in the mic line. I do not have a wiring diagram for the mic. I looked
at the FSG-60M installation instructions was trying to figure out if an
amplifier is needed to run the new set up. W&W was not very helpful
and I could use some expertise as I thought it would be rather simple
to replace the mic. The radio is set up for a dynamic mic already. It is
inscribed on the outer case. I do not believe it was ever changed from
the previous owner. Anybody with experience with this set up? Thanks,
Doug

Doug, no problem.
From what I read, I didn't see which mic you're going to, thus no further info.
Pass that on (what mic you're going to), maybe one of can provide some more info.
If nothing else, this thread may come up (with similar questions/search), thus more info linked for the next person..... ;-)