![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
I'm not sure if this can support it or not so I'm asking:
Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#2
|
|||
|
|||
![]()
You didn't say what your USP socket was on? It is an interesting question that I also interests me. I now have 3 on-board devices (ClearNav Vario, ClearNav and FLARM) all with USB ports. Could be helpful to charge a dying phone on an outlanding.
-Jim On Saturday, July 28, 2012 1:27:04 PM UTC-4, John wrote: I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#3
|
|||
|
|||
![]()
On Saturday, July 28, 2012 1:27:04 PM UTC-4, John wrote:
I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John You didn't say what your USB socket was on? It is a question that also interests me. I now have 3 on-board devices (ClearNav Vario, ClearNav and FLARM) all with USB ports. Could be helpful to charge a dying phone on an outlanding... -Jim |
#4
|
|||
|
|||
![]()
At 21:35 28 July 2012, Jim wrote:
On Saturday, July 28, 2012 1:27:04 PM UTC-4, John wrote: I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John You didn't say what your USB socket was on? It is a question that also interests me. I now have 3 on-board devices (ClearNav Vario, ClearNav and FLARM) all with USB ports. Could be helpful to charge a dying phone on an outlanding... -Jim "Socket" with a capital "S". http://www.cumulus-soaring.com/socket.htm Mike |
#5
|
|||
|
|||
![]()
Possibly, but it depends on the device that's feeding the socket. For
example, My Cambridge 302 outputs 5v on the serial line but only 500mA (so I'm told). It is not enough to charge my Dell Streak 5 - only enough to slow down the discharge. To remedy that situation, I modified a car charger intended for mobile GPS or cell phones (5.17v output) and connected it directly to my ship's DC bus (with a fuse and on/off switch, of course). It will charge the Streak in flight very quickly. I'd suggest you do likewise. Get a car charger that puts out 5v and a USB extender cable. Cut the cable and connect the red and black wires to + and - respectively. It'll supply what you need. "John" wrote in message ... I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#6
|
|||
|
|||
![]()
Hi John,
The Socket Mobile Power Pack uses a standard USB (rectangular) connector. It is feasible that you could connect 2 devices to one Socket Mobile Power Pack using a USB splitter of some sort. I would be a little nervous that if one of the 2 devices was at a significantly higher voltage than the other device there could be significant current flow between them - but it is probably unlikely that would be a problem. Best Regards, Paul Remde Cumulus Soaring, Inc. _________________________________________________ "John" wrote in message ... I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#7
|
|||
|
|||
![]()
I have personally had success in plugging two low current devices in to a Socket Power Pack. I used a USB- 3 Outlet Splitter. Everything worked fine until I plugged in something with a higher current draw, then the splitter turned off and acted like it had been unplugged. Once I unplugged it and then plugged it back in, the two low draw devices worked fine. I think the limitation is mainly in the type of USB splitter that you use.
The two devices that I had were the NANO and the Collibri II. They worked fine together. Once I plugged in my phone (XC SOAR) it had issues and nothing got external power. |
#8
|
|||
|
|||
![]()
.... Or modify something like this:
http://stuntcams.com/shop/gopro-char...ter-p-173.html Open it up and attach red and black wires to the appropriate terminals (it should be apparent) and use a panel mounted switch to connect/remove ship's power. It should also have an internal fuse which will be obvious when you open it. If not, use an inline fuse of 5 amps or so. Or... you could wire in a cigarette lighter adaptor and simply plug the thing in. It will easily feed two devices through a splitter. "Dan Marotta" wrote in message ... Possibly, but it depends on the device that's feeding the socket. For example, My Cambridge 302 outputs 5v on the serial line but only 500mA (so I'm told). It is not enough to charge my Dell Streak 5 - only enough to slow down the discharge. To remedy that situation, I modified a car charger intended for mobile GPS or cell phones (5.17v output) and connected it directly to my ship's DC bus (with a fuse and on/off switch, of course). It will charge the Streak in flight very quickly. I'd suggest you do likewise. Get a car charger that puts out 5v and a USB extender cable. Cut the cable and connect the red and black wires to + and - respectively. It'll supply what you need. "John" wrote in message ... I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#9
|
|||
|
|||
![]()
....Or this:
http://www.getusb.info/review-usb-car-adapter-charger/ It looks to me like the end cap of this one will come off and mount directly to your panel giving you two USB power ports. How simple is that? "Dan Marotta" wrote in message ... ... Or modify something like this: http://stuntcams.com/shop/gopro-char...ter-p-173.html Open it up and attach red and black wires to the appropriate terminals (it should be apparent) and use a panel mounted switch to connect/remove ship's power. It should also have an internal fuse which will be obvious when you open it. If not, use an inline fuse of 5 amps or so. Or... you could wire in a cigarette lighter adaptor and simply plug the thing in. It will easily feed two devices through a splitter. "Dan Marotta" wrote in message ... Possibly, but it depends on the device that's feeding the socket. For example, My Cambridge 302 outputs 5v on the serial line but only 500mA (so I'm told). It is not enough to charge my Dell Streak 5 - only enough to slow down the discharge. To remedy that situation, I modified a car charger intended for mobile GPS or cell phones (5.17v output) and connected it directly to my ship's DC bus (with a fuse and on/off switch, of course). It will charge the Streak in flight very quickly. I'd suggest you do likewise. Get a car charger that puts out 5v and a USB extender cable. Cut the cable and connect the red and black wires to + and - respectively. It'll supply what you need. "John" wrote in message ... I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John |
#10
|
|||
|
|||
![]()
On Saturday, July 28, 2012 10:27:04 AM UTC-7, John wrote:
I'm not sure if this can support it or not so I'm asking: Can you plug a USB adapter into the Socket and charge multiple USB devices into the Socket for charging simultaneously? (for example: Socket-4USB Adaptor-2 Phones thanks, John I should have clarified - my example was exactly the situation I want to do - to be able to charge both phones (same type) from the Socket Mobile Battery (product). I do have a cigarette-lighter adapter that has two USB ports on it which is usual to charge both of our phones at the same time. It's just when we are out and about and need to charge them. Purely a non-aviation use for the battery I used to use to power my 310 last year. |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Basic battery charger question | RS | Soaring | 5 | March 19th 12 03:03 AM |
Battery Charger | [email protected] | Soaring | 5 | February 5th 07 06:41 AM |
Jim Weir - desulfating battery charger | Ernest Christley | Home Built | 5 | December 21st 06 10:28 PM |
RG Battery Charger by Jim Weir in Kitplanes | Kevin O'Brien | Home Built | 4 | January 6th 05 01:19 AM |
12 Volt DC input Battery Charger | Michael I Green | Soaring | 5 | March 14th 04 08:41 AM |