![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Ted,
If you want to try wiring in a different mic (and flipping a switch under the cover of the radio to change to the other mic style setting), the wiring diagram is available at: http://www.wingsandwheels.com/AR4201%20Manual.pdf Assuming here that it is a 4201 you have. Otherwise, Rex's comments are good. Try installing an identical radio and see if you have the same problem. I suspect you will. I bet Rex or Tim or one of the guys could get a replacement mic on its way to you tomorrow., as I suspect that is where your problem really is. V2C coming soon, huh? Nice! I suspect you will like it a LOT! Steve |
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Becker radio repair | [email protected] | Soaring | 7 | March 10th 10 03:14 PM |
Becker radio repair | Steve Leonard | Soaring | 2 | August 23rd 05 02:25 AM |
Dittel Radio Repair | [email protected] | Soaring | 4 | July 22nd 05 12:02 PM |
I Hate Radios | Ron Wanttaja | Home Built | 9 | June 6th 05 05:39 PM |
Calibrate? Repair? Adjust? | RST Engineering | Owning | 3 | April 4th 05 01:41 PM |