![]() |
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below. |
|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
A question about something that I guess I just didn't get enough info on
during my instrument training. What exactly are you looking for when looking at a radar image. Are you trying to avoid all returns? Is an area of just green ok? Any other things in particular to look for? |
#2
|
|||
|
|||
![]()
Matt Young ) wrote:
A question about something that I guess I just didn't get enough info on during my instrument training. What exactly are you looking for when looking at a radar image. Are you trying to avoid all returns? Is an area of just green ok? Any other things in particular to look for? Don't rely on color, as different vendors of radar data might color code the returns differently. Instead, you ought to rely on the intensity level, which is represented by the different colors on a color radar product. Refer to the radar key to know what color each intensity level is. Rod Machado wrote a pretty good AOPA Pilot article about this very thing about a year and a half ago. He discussed the relationship between intensity level and the probability of severe to destructive turbulence. As there is a small probability of destructive turbulence in level three returns, with this probability significantly increasing in each of the higher levels, Machado stated that one should avoid level three and higher to avoid the probability of destructive turbulence. -- Peter |
#3
|
|||
|
|||
![]()
I think that Capt Dave Gwinn, the airborne radar guru, has a web site. I
don't know the URL, but I'll bet you could google it up. Bob Gardner "Matt Young" wrote in message ink.net... A question about something that I guess I just didn't get enough info on during my instrument training. What exactly are you looking for when looking at a radar image. Are you trying to avoid all returns? Is an area of just green ok? Any other things in particular to look for? |
#4
|
|||
|
|||
![]()
Where did you come up with this? All airborn weather radar systems have
the same color vs. intensity scale. For example red is always 40dbz. Mike MU-2 "Peter R." wrote in message ... Matt Young ) wrote: A question about something that I guess I just didn't get enough info on during my instrument training. What exactly are you looking for when looking at a radar image. Are you trying to avoid all returns? Is an area of just green ok? Any other things in particular to look for? Don't rely on color, as different vendors of radar data might color code the returns differently. Instead, you ought to rely on the intensity level, which is represented by the different colors on a color radar product. Refer to the radar key to know what color each intensity level is. Rod Machado wrote a pretty good AOPA Pilot article about this very thing about a year and a half ago. He discussed the relationship between intensity level and the probability of severe to destructive turbulence. As there is a small probability of destructive turbulence in level three returns, with this probability significantly increasing in each of the higher levels, Machado stated that one should avoid level three and higher to avoid the probability of destructive turbulence. -- Peter |
#5
|
|||
|
|||
![]()
Mike Rapoport ) wrote:
Where did you come up with this? All airborn weather radar systems have the same color vs. intensity scale. For example red is always 40dbz. Mike, I interpreted his post as referring to ground-based radar products. I guess I made a leap of assumption that since the OP was newly instrument rated, he was referring to pre-flight, not in-flight radar interpretation. But perhaps he is flying behind in-flight radar system? It would be helpful if he posted a follow-up. Oh, and BTW, I obviously know nothing about active radar in the cockpit. I have WSI's downlinked Nexrad in the Bonanza, but even within this product line WSI uses slightly different colors to represent different intensities depending on the display (MX20 versus laptop screen, etc). -- Peter |
#6
|
|||
|
|||
![]()
Weather Radar is the same as vision in another part of the spectrum. It has
certain resolution and can penetrate a certain distance into obscuring conditions. The beam reflects off all surfaces (except the stuff stealth aircraft are made of presumably). The value of radar is that there is a very high corralation between the reflectivity of water droplets and turbulence. Large droplets are formed from vertical motion.and large droplets reflect radar much better than small ones (that is why most clouds appear transparent to radar.). More vertical motion larger drops. You have undoubtedly experienced the difference in drop sizes from thunderstorms vs. stratiform rain. To evaluate a target, you first have to determine that you are not looking at a ground return which you do by knowing your altitude, beam width and antenna tilt setting. Generally you avoid all radar targets containing red (40dbz) returns. You avoid the whole target, not just the red part. I usually avoid yellow too. Even green targets are fairly bumpy and full of ice at cruise altitudes (above FL180). Green at lower altiudes can be smooth. There are various shapes that are associated with hail and tornados but most people avoid all thunderstorms. The irregular targets are just avoided by a greater distance. Basically it comes down to the fact that anything that lifts huge amounts of water miles into the atmosphere contains a lot of vertical shear and therefore turbulence. There are several books on the subject, I like Archie Trammels stuff, Dave Gwinn's book and Severe Weather Flying by Newton. There was a great deal on AvWeb a couple of years ago where you got Trammels video course, Severe Weather Flying and Buck's Weather Flying for around $125 along with a discount for his live course. Mike MU-2 "Matt Young" wrote in message ink.net... A question about something that I guess I just didn't get enough info on during my instrument training. What exactly are you looking for when looking at a radar image. Are you trying to avoid all returns? Is an area of just green ok? Any other things in particular to look for? |
#7
|
|||
|
|||
![]()
Fair enough! I assumed that he was talking about airborn radar. It is
interesting how personal experience colors our interpretation of the same statement! Mike MU-2 "Peter R." wrote in message ... Mike Rapoport ) wrote: Where did you come up with this? All airborn weather radar systems have the same color vs. intensity scale. For example red is always 40dbz. Mike, I interpreted his post as referring to ground-based radar products. I guess I made a leap of assumption that since the OP was newly instrument rated, he was referring to pre-flight, not in-flight radar interpretation. But perhaps he is flying behind in-flight radar system? It would be helpful if he posted a follow-up. Oh, and BTW, I obviously know nothing about active radar in the cockpit. I have WSI's downlinked Nexrad in the Bonanza, but even within this product line WSI uses slightly different colors to represent different intensities depending on the display (MX20 versus laptop screen, etc). -- Peter |
#8
|
|||
|
|||
![]()
Mike Rapoport wrote:
Fair enough! I've always thought that was an Australian expression (personal experience colours our etc ![]() -- Nick |
#9
|
|||
|
|||
![]()
I was referring to ground based radar, things I can look at before
leaving. No radar in my skyhawk. Peter R. wrote: Mike Rapoport ) wrote: Where did you come up with this? All airborn weather radar systems have the same color vs. intensity scale. For example red is always 40dbz. Mike, I interpreted his post as referring to ground-based radar products. I guess I made a leap of assumption that since the OP was newly instrument rated, he was referring to pre-flight, not in-flight radar interpretation. But perhaps he is flying behind in-flight radar system? It would be helpful if he posted a follow-up. Oh, and BTW, I obviously know nothing about active radar in the cockpit. I have WSI's downlinked Nexrad in the Bonanza, but even within this product line WSI uses slightly different colors to represent different intensities depending on the display (MX20 versus laptop screen, etc). |
#10
|
|||
|
|||
![]()
Matt Young wrote in news:0i0fd.6540$KJ6.2254
@newsread1.news.pas.earthlink.net: I was referring to ground based radar, things I can look at before leaving. No radar in my skyhawk. I have to say it's hit or miss. I've flown through areas that ground radar had painted yellow and some red, and never saw a drop of rain, not any turbulence. I've also seen some heavy rain that hadn't been on the TV earlier. I've seen heavy precip shown over the place where I was sitting, on the ground, and not a drop of rain had fallen all day. Look at radar presentations with a jaundiced eye, and take them with a lot of salt, to mix some metaphors. Read pireps, and ask the FSS briefer what has been going on. -- Regards, Stan |
|
Thread Tools | |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Why is ADF or Radar Required on MFD ILS RWY 32 Approach Plate? | S. Ramirez | Instrument Flight Rules | 17 | April 2nd 04 11:13 AM |
Radar contact before squawk | David Brooks | Instrument Flight Rules | 20 | March 25th 04 01:34 AM |
Lost comms after radar vector | Mike Ciholas | Instrument Flight Rules | 119 | January 31st 04 11:39 PM |
Ham sandwich navigation and radar failure | David Brooks | Instrument Flight Rules | 47 | December 31st 03 12:15 AM |
Marine Radar in a plane? | Jay Honeck | Home Built | 31 | August 13th 03 06:56 PM |